Page 1 of 2 12 LastLast
Showing results 1 to 15 of 21

Thread: Burn Quality Debate

  1. #1
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default Burn Quality Discussion/Debate

    Let's open this subject up for debate

    To me the primary factor involved is the media(blanks) used.

    other factors would or might be burner, firmware, burn speed, miscellaneous stuff (like power supply and multitasking) and burn software.

    any personal experiences?
    Last edited by Chewy; 11 Jun 2006 at 01:38 AM

  2. #2
    Im Off To See The Wizard mill's Avatar
    Join Date
    Oct 2005
    Location
    cornfields
    Posts
    1,105

    Default

    Software would play a big factor i believe, as far as the compression ratio
    Keep Plugin away

  3. #3
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Quote Originally Posted by mill
    Software would play a big factor i believe, as far as the compression ratio
    but that wouldn't be burn quality related

    ps: long time mill, missed you

  4. #4
    Im Off To See The Wizard mill's Avatar
    Join Date
    Oct 2005
    Location
    cornfields
    Posts
    1,105

    Default

    Ok ,sorry i was think picture quality. I guess there be to many things involed there.
    Keep Plugin away

  5. #5
    Yummy!!! daman's Avatar
    Join Date
    Apr 2006
    Location
    Michigan,U.S.A!!!
    Posts
    684

    Default

    I agree,,,media and burn speed is a BIG one.

    seen hundreds of posts about this and the results where these two 80%
    of the time.....$.02
    She's going down to the devil, down down to 90 degrees.

    Rock on bro!!!!
    _________________________________________________
    Down load DVDFab Decrypter:Here
    Down load shrink 3.2.0.15: Here
    DVD Decrypter 3.5.4.0: Here
    Down load VoBblanker: Here
    Down load ImgBurn: Here
    Down load RipIt4Me: Here
    RipIt4Me guide: Here

  6. #6
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Default

    Quote Originally Posted by daman
    I agree,,,media and burn speed is a BIG one.

    seen hundreds of posts about this and the results where these two 80%
    of the time.....$.02
    And the other 20 % is DMA and firmware related!

  7. #7
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    I wouldn't leave burner out of it

  8. #8
    Yummy!!! daman's Avatar
    Join Date
    Apr 2006
    Location
    Michigan,U.S.A!!!
    Posts
    684

    Default

    Quote Originally Posted by Chewy
    I wouldn't leave burner out of it
    Neither would i.............
    She's going down to the devil, down down to 90 degrees.

    Rock on bro!!!!
    _________________________________________________
    Down load DVDFab Decrypter:Here
    Down load shrink 3.2.0.15: Here
    DVD Decrypter 3.5.4.0: Here
    Down load VoBblanker: Here
    Down load ImgBurn: Here
    Down load RipIt4Me: Here
    RipIt4Me guide: Here

  9. #9
    King of Digital Video
    King of Digital Video
    NightTran's Avatar
    Join Date
    Aug 2005
    Location
    eastcoast, on the beach
    Posts
    4,224

    Default

    Quote Originally Posted by daman
    I agree,,,media and burn speed is a BIG one.

    seen hundreds of posts about this and the results where these two 80%
    of the time.....$.02
    good media burn speed wont change much unless 16x or 2.4 x

  10. #10
    Yummy!!! daman's Avatar
    Join Date
    Apr 2006
    Location
    Michigan,U.S.A!!!
    Posts
    684

    Default

    I think another one would be "Multi tasking" wile burning, don't do it.......
    She's going down to the devil, down down to 90 degrees.

    Rock on bro!!!!
    _________________________________________________
    Down load DVDFab Decrypter:Here
    Down load shrink 3.2.0.15: Here
    DVD Decrypter 3.5.4.0: Here
    Down load VoBblanker: Here
    Down load ImgBurn: Here
    Down load RipIt4Me: Here
    RipIt4Me guide: Here

  11. #11
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Quote Originally Posted by NightTran
    good media burn speed wont change much unless 16x or 2.4 x
    good point when everything else is right, 4x thru 12x all works
    exception, my nec 3550 does not like 12X

  12. #12
    Yummy!!! daman's Avatar
    Join Date
    Apr 2006
    Location
    Michigan,U.S.A!!!
    Posts
    684

    Default

    Quote Originally Posted by Chewy
    good point when everything else is right, 4x thru 12x all works
    exception, my nec 3550 does not like 12X
    WOw i would never even think about burning at 12X,

    my NERO scans take a sh*t anything over 8X with TY's and a 3540........
    She's going down to the devil, down down to 90 degrees.

    Rock on bro!!!!
    _________________________________________________
    Down load DVDFab Decrypter:Here
    Down load shrink 3.2.0.15: Here
    DVD Decrypter 3.5.4.0: Here
    Down load VoBblanker: Here
    Down load ImgBurn: Here
    Down load RipIt4Me: Here
    RipIt4Me guide: Here

  13. #13
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    I did a little testing of tyg02 and 12x with my nec 3540, it never did as well as at 8x and that was when it was new, but firmware may have improved.

  14. #14
    Yummy!!! daman's Avatar
    Join Date
    Apr 2006
    Location
    Michigan,U.S.A!!!
    Posts
    684

    Default

    Quote Originally Posted by Chewy
    I did a little testing of tyg02 and 12x with my nec 3540, it never did as well as at 8x and that was when it was new, but firmware may have improved.
    When i backup i got all day so 4x to 8x works for me
    She's going down to the devil, down down to 90 degrees.

    Rock on bro!!!!
    _________________________________________________
    Down load DVDFab Decrypter:Here
    Down load shrink 3.2.0.15: Here
    DVD Decrypter 3.5.4.0: Here
    Down load VoBblanker: Here
    Down load ImgBurn: Here
    Down load RipIt4Me: Here
    RipIt4Me guide: Here

  15. #15
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    In a few cases 12x is the best speed to burn at, I just burned a disk at 12x with my nec 3540, up to 2.4 gig I had a 99 with pif ~50, when 12x kicked in, I jumped to over 5600 PIF in 1.2 more gigs.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. testing result with different type of dvdr 4x from meritline and shop4tech
    By dvdram in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 4
    Last Post: 12 Jul 2003, 03:05 AM
  2. Replies: 0
    Last Post: 6 Jul 2003, 07:28 PM
  3. Replies: 3
    Last Post: 5 Jul 2003, 11:48 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •