Announcement

Collapse
No announcement yet.

Continued problems with dvd 95copypro, and dvd shrink

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RICK59
    Junior Member
    Junior Member
    • Sep 2004
    • 45

    Continued problems with dvd 95copypro, and dvd shrink

    Hello everyone,

    Well this is Rick again, and I am totally baffled. How is it possible that from moment to another, these 2 programs are mysteriously acting very strange. I've already tried reinstall, remove programs that might be of conflict. As I mentioned before, the only updates to my computer in the last month, was upgrade to broadband connection, and unitlize a disk recovery program called "stellar phoenix". Ironically, last week, I briefly downloaded a file sharing service for musis downloads, called "LimeWire" after installing it, I noticed that my system slowed down considerably, so I quickly removed it. Around that time frame is when the problems began. I took the liberty to include with this message a copy of the latest error log. I hope I am doing this right. I,ve already destroyed about 10 good discs (TDK, Fuji). Please, if anyone can help, let me know. Compared to most of the members of this forum, I am not as knowledgable, so please bear with me.

    Thanks,

    Rick

    Nero Serial Removed*

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 6:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:04 PM
    Nero API version: 6.3.1.4
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <Memorex DVD+/-RW True8Xn>Version: 1.G2 - HA 2 TA 0 - 6.3.1.4
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : _NEC NR-7900A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LG CD-ROM CRD-8483B atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    _NEC NR-7900A E: CDRom0
    LG CD-ROM CRD-8483B F: CDRom1
    Memorex DVD+/-RW True8Xn D: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 254MB (260400kB)
    Free physical memory: 84MB (86556kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    20.6.2006
    NeroAPI
    1:35:01 AM #1 Phase 112 File APIProgress.cpp, Line 263
    DVD-Video files reallocation started

    1:35:01 AM #2 Phase 114 File APIProgress.cpp, Line 263
    DVD-Video files reallocation completed (no file modified)

    1:35:01 AM #3 Phase 111 File APIProgress.cpp, Line 263
    DVD-Video files sorted

    1:35:02 AM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    1:35:02 AM #5 Text 0 File Writer.cpp, Line 124
    Writer Memorex DVD+/-RW True8Xn running

    1:35:02 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    1:35:02 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3898
    First writeable address = 0 (0x00000000)

    1:35:02 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3898
    First writeable address = 0 (0x00000000)

    1:35:02 AM #9 Text 0 File Burncd.cpp, Line 3188
    Turn on Disc-At-Once, using DVD media

    1:36:31 AM #10 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2233935 (496:25.60, 4363MB)

    1:36:31 AM #11 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    1:36:31 AM #12 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: Memorex DVD+/-RW True8Xn, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AE1
    Disc Application Code: 64, Disc Physical Code: 193

    1:36:31 AM #13 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
    Disc not writeable. Insert writeable disc.
    (Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    1:36:31 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2233936 (2233936) = #2233936/496:25.61
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233936 blocks [Memorex DVD+/-RW True8Xn]
    --------------------------------------------------------------

    1:36:31 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [Memorex DVD+/-RW True8Xn] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4575100928, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2233936 | lead-out | 1 | 0x00 | 0x41

    1:36:34 AM #16 Phase 24 File APIProgress.cpp, Line 263
    Caching of files started

    1:36:34 AM #17 Text 0 File Burncd.cpp, Line 4195
    Cache writing successful.

    1:36:34 AM #18 Phase 25 File APIProgress.cpp, Line 263
    Caching of files completed

    1:36:34 AM #19 Phase 36 File APIProgress.cpp, Line 263
    Burn process started at 2x (2,770 KB/s)

    1:36:34 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2334
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:36:34 AM #21 Text 0 File DVDR.cpp, Line 1597
    Recording mode: Sequential Recording Mode

    1:36:34 AM #22 Text 0 File Mmc.cpp, Line 19872
    Set BUFE: supported -> ON

    1:36:34 AM #23 Text 0 File DVDR.cpp, Line 1738
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:36:34 AM #24 Text 0 File Cdrdrv.cpp, Line 7993
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    1:36:40 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
    01:36:40.062 - Memorex DVD+/-RW True8Xn\H2 T0 : Queue again later

    1:36:58 AM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00BA0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    1:36:58 AM #27 CDR -500 File Writer.cpp, Line 301
    SCSI command aborted
    Memorex DVD+/-RW True8Xn\H2 T0

    1:36:58 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    1:36:58 AM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    1:36:58 AM #30 Text 0 File DVDR.cpp, Line 1947
    EndDAO: Last written address was -1

    1:37:58 AM #31 CDR -1175 File Cdrdrv.cpp, Line 1240
    Internal trace
    Resending of command failed after 30000ms
    CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00


    1:37:58 AM #32 SCSI -1169 File Cdrdrv.cpp, Line 1241
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012ABC8
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x08
    ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x

    1:38:28 AM #33 CDR -1175 File Cdrdrv.cpp, Line 1240
    Internal trace
    Resending of command failed after 30000ms
    CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00


    1:38:28 AM #34 SCSI -1169 File Cdrdrv.cpp, Line 1241
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012ABC8
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x08
    ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x

    1:38:28 AM #35 CDR -1169 File WriterStatus.cpp, Line 164
    Logical unit not ready, operation in progress

    1:38:28 AM #36 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    1:38:58 AM #37 CDR -1175 File Cdrdrv.cpp, Line 1240
    Internal trace
    Resending of command failed after 30000ms
    CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00


    1:38:58 AM #38 SCSI -1169 File Cdrdrv.cpp, Line 1241
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012AD6C
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x08
    ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x

    1:39:28 AM #39 CDR -1175 File Cdrdrv.cpp, Line 1240
    Internal trace
    Resending of command failed after 30000ms
    CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00


    1:39:28 AM #40 SCSI -1169 File Cdrdrv.cpp, Line 1241
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012AD6C
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x08
    ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x

    1:39:28 AM #41 CDR -1169 File WriterStatus.cpp, Line 169
    Logical unit not ready, operation in progress

    1:39:28 AM #42 TRANSFER -39 File WriterStatus.cpp, Line 169
    Could not perform EndSession

    1:39:58 AM #43 Phase 38 File APIProgress.cpp, Line 263
    Burn process failed at 2x (2,770 KB/s)

    1:39:58 AM #44 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    1:39:58 AM #45 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.1.1.210, size=23721 bytes, created 2/3/2006 8:44:51 AM
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 6:06:00 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • blutach
    Not a god of digital video
    • Oct 2004
    • 24627

    #2
    This is a burning issue - thread transferred to Blank Media and Burning forum.

    But first get some decent media - those CMCs are just junk. Also, upgrade your Ner0 - you are many versions behind.

    Read and implement the Golden Rules of Burning.

    Regards
    Les

    Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

    Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
    [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

    Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

    Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


    You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

    Explore the sites and the programs - there's a gold mine of information in them

    Don't forget to play the Digital Digest Quiz!!! (Click here)

    Comment

    • RICK59
      Junior Member
      Junior Member
      • Sep 2004
      • 45

      #3
      Burning issues.

      Hello Sir,

      Are you saying the TDK and FUJI are cheap brands? I dont think so. I've been using them for quite a while, with very good results. I was wondering If you had an opportunity to examine the log that I posted. Is your response based on that info? I will certaintly follow your instructions. I will keep you posted on my progress. If you have any other solutions, please let me know. Thank you very much for taking the time to read this message.

      Rick

      Comment

      • LT. Columbo
        Demigod of Digital Video
        • Nov 2004
        • 10671

        #4
        hi rick59

        you'll find that the name on the pack doesn't always depict the actual disc you buy as different manufacturers make them. it's the ID code that is important as blooie pointed out. you have CMC's . i've had great success with them too, but few have the same results and it is still considered inferior media.
        "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
        Columbo moments...
        "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
        "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
        (An Exercise In Fatality, 1974)


        Comment

        • RICK59
          Junior Member
          Junior Member
          • Sep 2004
          • 45

          #5
          DVD copy pro saga continues.

          Hello Lt.

          Thanks for responding to my desperate dilema. What are cmcs, and it is possbile for you to provide me with the address on Nero for revisions? The thing is, I still convinced, that there is a program that is conflicting with dvdcopy pro, and dvd shrink. But, I just can't seem to figure it out. Have you seen this kind of problem before? Again, thank you for your support, you guys are awesome. By the way, that was a hek of a show, back in the 70's.

          Rick

          Comment

          • blutach
            Not a god of digital video
            • Oct 2004
            • 24627

            #6
            And of course I read your log Rick! The first thing I look for is crap media. Do read the Golden rules - I'm sure they will help.

            And read "Media Quality" in my signature to see how the brand marketers hoodwink you into thinking you have high quality media when they have sold you a pup.

            Regards
            Les

            Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

            Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
            [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

            Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

            Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


            You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

            Explore the sites and the programs - there's a gold mine of information in them

            Don't forget to play the Digital Digest Quiz!!! (Click here)

            Comment

            • Chewy
              Super Moderator
              • Nov 2003
              • 18971

              #7
              did a 2x burn usually take over an hour when it used to work or did someone add a usb2 card to that computer?

              have you run a virus and trojan scan since being on limewire, preferably in safe mode?

              Comment

              Working...
              😀
              🥰
              🤢
              😎
              😡
              👍
              👎