Burn process failed at 4x (5,540 KB/s)

[RavenX]

Tried burning some dvd video files to a blank dvd and I get this error.
Burn process failed at 4x (5,540 KB/s)

here is the log


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 PM
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9A4> Version: 1.F1 - HA 4 TA 0 - 6.6.0.18
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1302>Version: 1006 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TDK CDRW121032 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1302 atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JD-00GBB0 02.0 viamraid Port 2 ID 0 DMA: Off
CdRomPeripheral : CE1512U IIV161K 1.0 dtscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
TDK CDRW121032 E: CDRom0
TOSHIBA DVD-ROM SD-M1302 F: CDRom1
CE1512U IIV161K G: CDRom2
MAD DOG MD-16XDVD9A4 H: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 689MB (705820kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.7.2006
UDF/ISO compilation
11:27:04 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

11:27:04 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

11:27:04 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

11:27:04 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

11:27:04 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

11:27:04 AM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9A4 running

11:27:04 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:27:04 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:27:04 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:27:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2289455 (508:46.05, 4471MB)

11:27:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:27:05 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9A4, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

11:27:05 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:27:05 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2289456 (2289456) = #2289456/508:46.6
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289456 blocks [MAD DOG MD-16XDVD9A4]
--------------------------------------------------------------

11:27:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9A4] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688805888, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2289456 | lead-out | 1 | 0x41 | 0x00

11:27:06 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:27:06 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

11:27:06 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:27:06 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

11:27:06 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:27:06 AM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

11:27:06 AM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

11:27:06 AM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

11:27:06 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:27:08 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
11:27:08.353 - MAD DOG MD-16XDVD9A4\H4 T0 : Queue again later

11:27:08 AM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x0BCA0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

11:27:09 AM #27 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x0C351400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

11:27:09 AM #28 CDR -1114 File Writer.cpp, Line 311
Reset occurred

11:27:09 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:27:09 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:27:09 AM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1

11:27:09 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 2:59:42 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Chewy]

Recorder: <MAD DOG MD-16XDVD9A4> Version: 1.F1

http://www.mdmm.com/support/drivers.asp

MD-16XDVD9A4_FW_v1F2.exe

WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 PM

I don't like system aspi with windows xp, especially from adaptec

[RavenX]

thx, i'll update my firmware. anyway to get ride of the aspi, and what would I replace it with.

[soup]

As well as the great advice you are getting you could also read The Golden Rules Of Burning.

[Chewy]

http://radified.com/ASPI/forceaspi.htm

use the kill aspi part and the check but don't install any new aspi, nero has it's own a good one, not a cruddy one like adaptec

[RavenX]

http://radified.com/ASPI/forceaspi.htm

use the kill aspi part and the check but don't install any new aspi, nero has it's own a good one, not a cruddy one like adaptec

that was it, thanks.