Announcement

Collapse
No announcement yet.

Burning problems with a D5 dvd

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • brandonboucher
    Junior Member
    Junior Member
    • Sep 2006
    • 5

    Burning problems with a D5 dvd

    Hi i can rip any dvd perfectly its the burning that always bites me in the ass. Everytime it burn any dvd it burns and says its 100% complete rite. so when you look at the dvd you can see a 1/2 inch dark line, then its white for another half inch then dark. Like the burning stoped righting the dvd for a minute and then started again. This always happens on any dvd burning software that i got. and i really need help because i dont know what to do. Thank you!!
    Last edited by brandonboucher; 17 Sep 2006, 01:06 PM.
  • soup
    Just Trying To Help
    • Nov 2005
    • 7524

    #2
    Welcome to the Forum. Let us know the process you use to get to the burning stage & what you are burning with? What also would be really good is to see a recent burn log?

    Comment

    • brandonboucher
      Junior Member
      Junior Member
      • Sep 2006
      • 5

      #3
      ??1

      Im using dvd shrink and i dont know were the burn logs are???

      Comment

      • soup
        Just Trying To Help
        • Nov 2005
        • 7524

        #4
        What are you using to burn? Are you using Nero automatically through Dvd Shrink? What did you use to rip to your hard drive?
        Last edited by soup; 17 Sep 2006, 01:22 PM.

        Comment

        • brandonboucher
          Junior Member
          Junior Member
          • Sep 2006
          • 5

          #5
          umm the dvd shrink program, dont mind my stupidness, the dvd im using is a "playo" 4.7 GB 8x dvd.

          Comment

          • soup
            Just Trying To Help
            • Nov 2005
            • 7524

            #6
            It is nothing to do with stupidness, everybody starts from the beginning. Look in your program files / Ahead / Nero & see if you see the word History then post back.

            Comment

            • brandonboucher
              Junior Member
              Junior Member
              • Sep 2006
              • 5

              #7
              How do i put files on here i clicked and pasted the information in the text document but it was to long???? oh wait ill use rapidshare!!http://rapidshare.de/files/33399607/NeroHistory.log

              Comment

              • soup
                Just Trying To Help
                • Nov 2005
                • 7524

                #8
                You only need to post the bottom one. Nero when you burn just keeps adding to that file so just post the last one.

                How to post your Nero Log.

                Comment

                • brandonboucher
                  Junior Member
                  Junior Member
                  • Sep 2006
                  • 5

                  #9
                  BrandonB

                  Nero Serial Removed

                  Windows XP 5.1
                  IA32
                  WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/19/2004 8:41:48 AM
                  ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 10:18:04 AM
                  Nero version: 6.3.0.6 (Nero Express)
                  Recorder: <_NEC DVD+-RW ND-6650A> Version: 102C - HA 1 TA 0 - 6.3.0.6
                  Adapter driver: <atapi> HA 1
                  Drive buffer : 2048kB
                  Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
                  Connected to MMC as unknown drive with class-nr : 11
                  Drive is autodetected - recorder class: DVD+R9 DL recorder
                  CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 102C - HA 1 TA 0 - 6.3.0.6
                  Adapter driver: <atapi> HA 1

                  === Scsi-Device-Map ===
                  DiskPeripheral : ST960822A atapi Port 0 ID 0 DMA: On
                  CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On
                  CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

                  === CDRom-Device-Map ===
                  _NEC DVD+-RW ND-6650A D: CDRom0
                  Generic DVD-ROM E: CDRom3
                  =======================

                  AutoRun : 1
                  Excluded drive IDs:
                  CmdQueuing : 1
                  CmdNotification: 2
                  WriteBufferSize: 83886080 (0) Byte
                  ShowDrvBufStat : 0
                  EraseSpeed : 0
                  BUFE : 0
                  Physical memory : 1015MB (1039740kB)
                  Free physical memory: 533MB (546596kB)
                  Memory in use : 47 %
                  Uncached PFiles: 0x0
                  Use Static Write Speed Table: 0
                  Use Inquiry : 1
                  Global Bus Type: default (0)
                  Check supported media : Disabled (0)

                  7.1.2006
                  CD-ROM (ISO)
                  1:47:37 PM #1 Text 0 File Isodoc.cpp, Line 6035
                  Iso document burn settings
                  ------------------------------------------
                  Determine maximum speed : FALSE
                  Simulate : FALSE
                  Write : TRUE
                  Finalize CD : TRUE
                  Multisession : FALSE
                  Burning mode : TAO
                  Mode : 1
                  ISO Level : 1 (Max. of 11 = 8 + 3 char)
                  Character set : ISO 9660
                  Joliet : TRUE
                  Allow pathdepth more than 8 directories : TRUE
                  Allow more than 255 characters in path : TRUE
                  Write ISO9660 ;1 file extensions : TRUE

                  1:47:37 PM #2 Phase 75 File dlgbrnst.cpp, Line 1802
                  JustLink activated

                  1:47:37 PM #3 Text 0 File Reader.cpp, Line 118
                  Reader running

                  1:47:37 PM #4 Text 0 File Writer.cpp, Line 124
                  Writer _NEC DVD+-RW ND-6650A running

                  1:47:37 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3898
                  First writeable address = 0 (0x00000000)

                  1:47:37 PM #6 Text 0 File Burncd.cpp, Line 3101
                  Turn on Track-at-once, using CD-R/RW media

                  1:47:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 244
                  Last possible write address on media: 359848 ( 79:59.73)
                  Last address to be written: 354005 ( 78:42.05)

                  1:47:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 249
                  Write in overburning mode: FALSE

                  1:47:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 2100
                  Recorder: _NEC DVD+-RW ND-6650A;
                  CDR code: 00 97 17 09; OSJ entry from: Moser Baer India Limited
                  ATIP Data:
                  Special Info [hex] 1: D0 40 A0, 2: 61 11 09 (LI 97:17.09), 3: 4F 3B 4A (LO 79:59.74)
                  Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

                  1:47:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 410
                  >>> Protocol of DlgWaitCD activities: <<<
                  =========================================

                  1:47:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 809
                  Setup items (after recorder preparation)
                  0: TRM_DATA_MODE1 (CTransferItem)
                  2 indices, index0 (150) not provided
                  original disc pos #0 + 354006 (354006) = #354006/78:40.6
                  relocatable, disc pos for caching/writing not required/required, no patch infos
                  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 354004 blocks [_NEC DVD+-RW ND-6650A]
                  --------------------------------------------------------------

                  1:47:37 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 978
                  Prepare recorder [_NEC DVD+-RW ND-6650A] for write in TAO
                  DAO infos:
                  ==========
                  MCN: ""
                  TOCType: 0x00; Session Closed, disc fixated
                  Tracks 1 to 1:
                  1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 725311488, ISRC ""
                  DAO layout:
                  ===========
                  __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
                  -150 | lead-in | 0 | 0x00 | 0x41
                  -150 | 1 | 0 | 0x00 | 0x41
                  0 | 1 | 1 | 0x00 | 0x41
                  354006 | lead-out | 1 | 0x00 | 0x41

                  1:47:37 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1024
                  Removed 2 run-out blocks from end of track 1. Length: 354006 -> 354004.

                  1:47:37 PM #14 Phase 24 File dlgbrnst.cpp, Line 1802
                  Caching of files started

                  1:47:37 PM #15 Text 0 File Burncd.cpp, Line 4108
                  Cache writing successful.

                  1:47:37 PM #16 Phase 25 File dlgbrnst.cpp, Line 1802
                  Caching of files completed

                  1:47:37 PM #17 Phase 36 File dlgbrnst.cpp, Line 1802
                  Burn process started at 24x (3,600 KB/s)

                  1:47:38 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2294
                  Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

                  1:47:38 PM #19 Text 0 File Mmc.cpp, Line 19734
                  Set BUFE: JustLink -> ON

                  1:52:12 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
                  all writers idle, stopping conversion

                  1:52:14 PM #21 Text 0 File Mmc.cpp, Line 14588
                  <_NEC DVD+-RW ND-6650A> start Close Session

                  1:52:45 PM #22 Phase 37 File dlgbrnst.cpp, Line 1802
                  Burn process completed successfully at 24x (3,600 KB/s)


                  Existing drivers:
                  File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
                  File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/19/2004 8:41:48 AM
                  File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 12:12:48 PM (Prassi/Veritas driver for win 2K)
                  File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 8:59:44 PM (Adapter driver for rec)

                  Registry Keys:
                  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

                  ====== *** Nero-Burning Rom, History File *** ======

                  Comment

                  • Dialysis1
                    Digital Video Specialist
                    Digital Video Specialist
                    • Apr 2006
                    • 910

                    #10
                    This log is for a CD.
                    DVDSubEdit
                    ImgBurn


                    Comment

                    • blutach
                      Not a god of digital video
                      • Oct 2004
                      • 24627

                      #11
                      This appearas less like a RipIt4Me Bug Report than a burning problem. Please post these issues in Blank Media and Burning forum in the future.

                      Thread transferred.

                      Regards
                      Les

                      Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                      Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                      [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                      Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                      Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                      You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                      Explore the sites and the programs - there's a gold mine of information in them

                      Don't forget to play the Digital Digest Quiz!!! (Click here)

                      Comment

                      Working...
                      😀
                      🥰
                      🤢
                      😎
                      😡
                      👍
                      👎