Page 1 of 2 12 LastLast
Showing results 1 to 15 of 17

Thread: help with Unspecified Recorder Error

  1. #1
    Junior Member
    Junior Member

    Join Date
    Oct 2006
    Posts
    8

    Default help with Unspecified Recorder Error

    I have been using Nero and DVD Shrink for a while now and have never had any problems until now. Last week I had to reformat my HD and reinstall everything. I can no longer back up my DVDs and I keep getting the same error.

    This error happens whether I use DVD Shrink or Nero. Once encoding is finished I get an Unspecified Recorder Error and the process halts.

    I have read many threads and have checked many settings on my computer. DMA is set correctly, I have the newest Firmware, and I even uninstalled and reinstalled Shrink since I read that Shrink had to be installed after Nero. I have even tried several different versions of Nero.

    I am using imation DVD-R blanks if that matters.

    Below is the log from the last burn attempt.

    Any suggestions would be greatly appreciated.

    Thanks,

    JSH

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.0.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Recorder: <SONY DVD RW DW-Q58A> Version: UYS3 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DW-Q58A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PO2470G SCX103W 2.0B vaxscsi Port 2 ID 0 DMA: Off
    CdRomPeripheral : PO2470G SCX103W 2.0B vaxscsi Port 2 ID 1 DMA: Off

    === CDRom-Device-Map ===
    SONY DVD RW DW-Q58A D: CDRom0
    PO2470G SCX103W E: CDRom1
    PO2470G SCX103W F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1006MB (1030576kB)
    Free physical memory: 322MB (329964kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.10.2006
    NeroAPI
    9:56:23 PM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    9:56:23 PM #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    9:56:23 PM #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    9:56:23 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    9:56:23 PM #5 Text 0 File Reader.cpp, Line 124
    Reader running

    9:56:23 PM #6 Text 0 File Writer.cpp, Line 113
    Writer D: SONY DVD RW DW-Q58A running

    9:56:23 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    9:56:23 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    9:56:23 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    9:56:23 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    9:56:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    9:56:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO

    9:56:24 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: SONY DVD RW DW-Q58A, Media type: DVD-R
    Disc Manufacturer: OPTODI - SCR016
    Disc Application Code: 64, Disc Physical Code: 193

    9:56:24 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:56:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [D: SONY DVD RW DW-Q58A]
    --------------------------------------------------------------

    9:56:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [D: SONY DVD RW DW-Q58A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    9:56:24 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:56:24 PM #18 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    9:56:24 PM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    9:56:24 PM #20 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    9:56:24 PM #21 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 1x (1,385 KB/s)

    9:56:24 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:56:24 PM #23 Text 0 File DVDR.cpp, Line 2469
    Recording mode: Sequential Recording Mode

    9:56:24 PM #24 Text 0 File MMC.cpp, Line 21541
    Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

    9:56:24 PM #25 Text 0 File DVDR.cpp, Line 2624
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:56:24 PM #26 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:56:34 PM #27 SPTI -1 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x27
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 27
    Buffer x01180000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    9:56:34 PM #28 CDR -1 File Writer.cpp, Line 302
    Unspecified Recorder Error
    D: SONY DVD RW DW-Q58A

    9:56:34 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:56:34 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:56:35 PM #31 Text 0 File DVDR.cpp, Line 2866
    EndDAO: Last written address was -1

    9:56:35 PM #32 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 1x (1,385 KB/s)

    9:56:35 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    9:56:35 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  2. #2
    Queen of Digital Video
    Queen of Digital Video
    photo_angel2004's Avatar
    Join Date
    Jan 2004
    Location
    Middle Earth USA
    Posts
    3,558

    Default

    Hello and welcome to the forum.

    This link here may help you.

    http://forum.digital-digest.com/showthread.php?t=45339

  3. #3
    Junior Member
    Junior Member

    Join Date
    Oct 2006
    Posts
    8

    Default

    Thanks so much,

    I have read many of those posts already, including some others about similar problems. I am still not able to figure out what the problem is.

    I am currently trying to burn from HD to DVD using Shrink (with Nero option turned off) and using Decrypter ISO method.

    I hope it works... I'm getting pretty frustrated.

    Any other suggestions?

    Thanks again,

    JSH

  4. #4
    Super Moderatress
    cynthia's Avatar
    Join Date
    Jan 2004
    Location
    Sweden
    Posts
    14,278

    Default

    Update Nero.

    www.nero.com

  5. #5
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    in this case I wouldn't use nero

    overloaded laptops with virtual drives do well just to work

    nice hard drive

    free up some memory/resources

    http://forum.digital-digest.com/showthread.php?t=56373

    don't multitask


    use better media, that's junk
    http://www.videohelp.com/dvdmedia.ph...PTODISCR016%20

    try imgburn

    unmount the virtual drives if all else fails

  6. #6
    Junior Member
    Junior Member

    Join Date
    Oct 2006
    Posts
    8

    Default

    I thought all of the burning aps use Nero? Can I burn without Nero?

    Also, I have Nero 7 Ultra (I thought that was the newest). What should I upgrade to?

    OK, so I tried again. This time I unmounted all virtual drives... I uninstalled the stupid Widget Engine... And I ran no other programs. The only background procs running are window blinds, cursor xp, and icon packager.

    Here is the new log file. Looks the same to me except for the virtual drives.

    Any more suggestions?

    Thanks, JSH

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.0.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Recorder: <SONY DVD RW DW-Q58A> Version: UYS3 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DW-Q58A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DW-Q58A D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1006MB (1030576kB)
    Free physical memory: 369MB (378640kB)
    Memory in use : 63 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.10.2006
    NeroAPI
    8:47:38 AM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    8:47:38 AM #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    8:47:38 AM #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    8:47:38 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    8:47:38 AM #5 Text 0 File Reader.cpp, Line 124
    Reader running

    8:47:38 AM #6 Text 0 File Writer.cpp, Line 113
    Writer D: SONY DVD RW DW-Q58A running

    8:47:38 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    8:47:38 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    8:47:38 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    8:47:38 AM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    8:47:39 AM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    8:47:39 AM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO

    8:47:39 AM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: SONY DVD RW DW-Q58A, Media type: DVD-R
    Disc Manufacturer: OPTODI - SCR016
    Disc Application Code: 64, Disc Physical Code: 193

    8:47:39 AM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:47:39 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [D: SONY DVD RW DW-Q58A]
    --------------------------------------------------------------

    8:47:39 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [D: SONY DVD RW DW-Q58A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    8:47:39 AM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    8:47:39 AM #18 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    8:47:39 AM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    8:47:39 AM #20 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    8:47:39 AM #21 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 1x (1,385 KB/s)

    8:47:39 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:47:39 AM #23 Text 0 File DVDR.cpp, Line 2469
    Recording mode: Sequential Recording Mode

    8:47:39 AM #24 Text 0 File MMC.cpp, Line 21541
    Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

    8:47:39 AM #25 Text 0 File DVDR.cpp, Line 2624
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:47:39 AM #26 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:47:50 AM #27 SPTI -1 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x27
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 27
    Buffer x01820000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    8:47:50 AM #28 CDR -1 File Writer.cpp, Line 302
    Unspecified Recorder Error
    D: SONY DVD RW DW-Q58A

    8:47:50 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:47:50 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    8:47:50 AM #31 Text 0 File DVDR.cpp, Line 2866
    EndDAO: Last written address was -1

    8:47:50 AM #32 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 1x (1,385 KB/s)

    8:47:50 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    8:47:50 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  7. #7
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    like cynthia said update nero 7(huge download) you are using the buggy first release

    or another option download imgburn(small application and download)
    and use it to burn

    won't make those opti disks good media tho

    should be able to burn at 4x with either updated nero or imgburn

  8. #8
    Banned ed klein's Avatar
    Join Date
    Mar 2004
    Location
    Over The Edge
    Posts
    880

    Default

    Ouch! My head hurts just reading you post. From my viewpoint this is what I would consider AFTER you get your hard drive back to normal or just the way you like it.

    1. RipIt4Me/DVD Shrink/Imageburn or RipIt4Me/DVD rebuilder/Imageburn is the easiest.
    2. Acronis Home Edition 9.0 for entire hard drive system backup and with the operating system backup, last time I checked around $49.
    3. RipIt4Me or DVDFabDecrypter or PgcEdit/Decrypter with PSL-2 package as the ripper.
    4. DVD Shrink or DVD rebuilder as the transcoder, encoder and compression and for custom building, DGIndex, TMPGEnc PLus, VOBEdit, IFOEdit, DVDSubEdit
    5. Imageburn as the burning software

    Last edited by ed klein; 3 Oct 2006 at 01:24 AM

  9. #9
    Junior Member
    Junior Member

    Join Date
    Oct 2006
    Posts
    8

    Default

    Thanks, I will try imageburn. Does this mean I can just get rid of Nero alltogether? And do I really need RipIt4Me if I use Shrink to make the iso?

    I hope this works.

    And in case you're wondering why I have such bad media... The 50 pack was on sale for $10 at Office Depot and I said to the guy, "These DVDs are no good" and he convinced me that they were.

    What a sucker.

    Thanks again for all the help.

    I'll be back if this doesn't work.

    JSH

  10. #10
    Junior Member
    Junior Member

    Join Date
    Oct 2006
    Posts
    8

    Default

    So, I tried imageburn... that didn't work. I got an error (failed to reserve track).

    I installed a different version of Nero... and tried Shrink again. It looks like the same error to me.

    What should I do? Please help!

    Thanks again

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.2.3.1
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 2, 3, 1

    Recorder: <SONY DVD RW DW-Q58A> Version: UYS3 - HA 1 TA 0 - 7.2.3.1
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DW-Q58A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DW-Q58A D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1006MB (1030576kB)
    Free physical memory: 310MB (318424kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.10.2006
    NeroAPI
    7:38:58 PM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    7:38:58 PM #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    7:38:58 PM #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    7:38:59 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    7:38:59 PM #5 Text 0 File Reader.cpp, Line 124
    Reader running

    7:38:59 PM #6 Text 0 File Writer.cpp, Line 113
    Writer D: SONY DVD RW DW-Q58A running

    7:38:59 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    7:38:59 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    7:38:59 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    7:38:59 PM #10 Text 0 File Burncd.cpp, Line 3400
    Turn on Disc-At-Once, using DVD media

    7:38:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    7:38:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO

    7:38:59 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: SONY DVD RW DW-Q58A, Media type: DVD-R
    Disc Manufacturer: OPTODI - SCR016
    Disc Application Code: 64, Disc Physical Code: 193

    7:38:59 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:38:59 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [D: SONY DVD RW DW-Q58A]
    --------------------------------------------------------------

    7:38:59 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: SONY DVD RW DW-Q58A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    7:38:59 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    7:38:59 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:38:59 PM #19 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    7:38:59 PM #20 Text 0 File Burncd.cpp, Line 4231
    Cache writing successful.

    7:38:59 PM #21 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    7:38:59 PM #22 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 1x (1,385 KB/s)

    7:38:59 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:38:59 PM #24 Text 0 File DVDR.cpp, Line 2872
    Recording mode: Sequential Recording Mode

    7:38:59 PM #25 Text 0 File DVDR.cpp, Line 3028
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:38:59 PM #26 Text 0 File Cdrdrv.cpp, Line 8995
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:39:10 PM #27 SPTI -1 File SCSIPassThrough.cpp, Line 291
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x27
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 27
    Buffer x00e80000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    7:39:10 PM #28 CDR -1 File Writer.cpp, Line 302
    Unspecified Recorder Error
    D: SONY DVD RW DW-Q58A

    7:39:10 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:39:10 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    7:39:10 PM #31 Text 0 File DVDR.cpp, Line 3268
    EndDAO: Last written address was -1

    7:39:10 PM #32 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 1x (1,385 KB/s)

    7:39:10 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    7:39:10 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  11. #11
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Default

    Your atapi error is returning an error of "write protected".

    Is this a rewriteable disc?? Have you erased it?

  12. #12
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Default

    http://www.videohelp.com/dvdwriters....ist=2#comments

    Look at the comments posted at videohelp about this burner. Only 2 comments and very questionable results.

  13. #13
    Junior Member
    Junior Member

    Join Date
    Oct 2006
    Posts
    8

    Default

    Thanks to all for the help.

    Tomorrow I will go get some new blank media and see if I can rule that out first.

    If better media doesn't do the trick I am going to assume that the problem is my optical drive.

    How can I find out what my options are dvd-r writers for my inspiron 700m?

    The dell website is no help and I can only find a few slim drives on the web that state that they will work in the 700m. Is there a list anywhere or will any atapi slim drive work?

    Thanks again,

    JSH

  14. #14
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    any good external drive is far better than the best internal slimline

    are you choosing that 1X burn speed with nero and imgburn?

    what happened to the imgburn log?

    forget that media with that burner?

  15. #15
    Junior Member
    Junior Member

    Join Date
    Oct 2006
    Posts
    8

    Default

    I thought externals were slower due to the USB.

    I'm choosing MAX burn speed with imgburn and Nero (am I supposed to change a setting of Nero or imgburn in order to use imgburn properly)

    Here is the log file:

    I 08:31:25 ImgBurn Version 2.1.0.0 started!
    I 08:31:26 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
    I 08:31:26 Initialising SPTI...
    I 08:31:26 Searching for SCSI / ATAPI devices...
    I 08:31:26 Found 1 DVD▒RW!
    I 08:31:40 Operation Started!
    I 08:31:40 Source File: C:\Documents and Settings\JB\Desktop\tbpwa.iso
    I 08:31:40 Source File Sectors: 2,285,851 (MODE1/2048)
    I 08:31:40 Source File Size: 4,681,422,848 bytes
    I 08:31:40 Source File Volume Identifier: DELETE
    I 08:31:40 Source File Implementation Identifier: DVD Shrink
    I 08:31:40 Source File File System(s): ISO9660, UDF (1.02)
    I 08:31:40 Destination Device: [1:0:0] SONY DVD RW DW-Q58A UYS3 (D (ATA)
    I 08:31:40 Destination Media Type: DVD-R (Disc ID: OPTODISCR016) (Speeds: 1x)
    I 08:31:40 Destination Media Sectors: 2,285,851
    I 08:31:40 Write Mode: DVD
    I 08:31:40 Write Type: DAO
    I 08:31:40 Write Speed: MAX
    I 08:31:40 Link Size: Auto
    I 08:31:40 Test Mode: No
    I 08:31:40 BURN-Proof: Enabled
    E 08:31:46 Failed to Reserve Track! - Command Sequence Error
    E 08:31:49 Operation Failed! - Duration: 00:00:09
    I 08:31:49 Average Write Rate: N/A - Maximum Write Rate: N/A


    Thanks,

    JSH

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Unspecified target error!! HELP
    By groovemaster1 in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 12
    Last Post: 4 Apr 2005, 01:43 PM
  2. Unspecified ERROR [0x1]
    By kangol in forum General Discussions
    Replies: 3
    Last Post: 25 Feb 2005, 04:43 PM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •