Showing results 1 to 8 of 8

Thread: Getting illegal disc burn process failed message when trying to burn a DVD with Nero

  1. #1
    Junior Member
    Junior Member

    Join Date
    Sep 2006
    Posts
    3

    Default Getting illegal disc burn process failed message when trying to burn a DVD with Nero

    Hello,
    I'm currently having a problem burning any discs with Nero. I keep getting "burn process failed" as soon as it starts to write to the DVD.
    This is happening with any format I attempt to burn, as you can see from the log, all I tried to burn was some picture files.
    I have a memorex DVD writer that came with Nero Suite, it supports DVD + / - / RW discs.
    I have Nero OEM version 6.6.1.4
    Here is the error log: (this was done using Sony DVD -Rs, but happens with + R format as well)

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0D20 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75FJA1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163B D: CDRom0
    Memorex DVD+/-DLRWL1 F16 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (522240kB)
    Free physical memory: 167MB (171636kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.10.2006
    ISO compilation
    10:30:53 AM #1 Text 0 File Isodoc.cpp, Line 6475
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:30:53 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    10:30:53 AM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    10:30:53 AM #4 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+/-DLRWL1 F16 running

    10:30:53 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    10:30:55 AM #6 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    10:30:55 AM #7 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 87519 ( 19:26.69, 170MB)

    10:30:55 AM #8 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    10:30:55 AM #9 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    10:30:55 AM #10 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:30:55 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 87520 (87520) = #87520/19:26.70
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 87520 blocks [Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    10:30:55 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 179240960, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    87520 | lead-out | 1 | 0x41 | 0x00

    10:30:55 AM #13 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:30:55 AM #14 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    10:30:55 AM #15 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    10:30:55 AM #16 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    10:30:55 AM #17 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    10:30:55 AM #18 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 4x (5,540 KB/s)

    10:30:55 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:30:55 AM #20 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    10:30:55 AM #21 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:30:55 AM #22 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:30:58 AM #23 SPTI -1046 File SCSIPassThrough.cpp, Line 289
    E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x0c1b0000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    10:30:58 AM #24 CDR -1046 File Writer.cpp, Line 311
    Illegal disc
    E: Memorex DVD+/-DLRWL1 F16

    10:30:58 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:30:58 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    10:30:58 AM #27 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was -1

    10:30:58 AM #28 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 2:16:24 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 2:53:14 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 2:53:54 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 2:57:12 PM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :

  2. #2
    Im Off To See The Wizard mill's Avatar
    Join Date
    Oct 2005
    Location
    cornfields
    Posts
    1,105

    Default

    http://ww2.nero.com/nero6/eng/InCD_CleanTool.html

    I have read incd causes nothing but trouble.You might want to uninstall.
    Last edited by mill; 3 Oct 2006 at 08:49 AM
    Keep Plugin away

  3. #3
    Not a god of digital video blutach's Avatar
    Join Date
    Oct 2004
    Location
    is everything!
    Posts
    24,627

    Default



    Looks like you got a duff disk or burner (try to clean it).

    Read and implement the Golden Rules of Burning and also Interpret Ner0's error codes in my signature.

    Regards

  4. #4
    Junior Member
    Junior Member

    Join Date
    Sep 2006
    Posts
    3

    Default

    Hi, I tried the clean tool, tried uninstalling and re-installing Nero, still having the same issues

    It does now work with DVD +Rs but still doesn't work with the same sony DVD -R discs I was successfully burning with a week ago...here is my current log, if anyone can help out it be greatly appreciated...thank you
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0D20 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75FJA1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On
    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163B D: CDRom0
    Memorex DVD+/-DLRWL1 F16 E: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (522240kB)
    Free physical memory: 154MB (158508kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    2.10.2006
    ISO compilation
    10:20:55 PM #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:20:55 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    10:20:55 PM #3 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+/-DLRWL1 F16 running

    10:20:55 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    10:20:55 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    10:20:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 234943 ( 52:12.43, 458MB)

    10:20:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    10:20:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    10:20:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:20:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 234944 (234944) = #234944/52:12.44
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 234944 blocks [Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    10:20:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 481165312, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    234944 | lead-out | 1 | 0x41 | 0x00

    10:20:56 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    10:20:56 PM #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    10:20:56 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    10:20:57 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    10:20:57 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:20:57 PM #17 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    10:20:57 PM #18 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    10:20:57 PM #19 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:20:57 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:20:59 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x033E0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    10:20:59 PM #22 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    10:20:59 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:21:00 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    10:21:00 PM #25 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was -1

    10:21:00 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)

    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  5. #5

  6. #6
    Im Off To See The Wizard mill's Avatar
    Join Date
    Oct 2005
    Location
    cornfields
    Posts
    1,105

    Default

    Blu do you think it has anything to do with the type of iso he trying to burn(pictures,ISO) , Im wondering what program he used to create the iso?

    mtamborra Have you tryed burning a movie yet either ISO or video ts format created either from ripit4me or shrink?Or have you tryed Imgburn as your burning program?
    Last edited by mill; 4 Oct 2006 at 10:39 PM
    Keep Plugin away

  7. #7
    Junior Member
    Junior Member

    Join Date
    Sep 2006
    Posts
    3

    Default

    I tried imgburn and received some sort of I/O error....

    I haven't tried cleaning the drive, and not sure how, any suggestions would be great

    I've tried to burn ISOs created with DVD shrink, (same ISOs which have worked in the past), I also tried just to slap a bunch of pictures (like 300 MB worth) on a data dvd disc to see if it just dealt with images, and I still am getting the illegal disc burn error

    It still burns CDs fine but is giving me all this hassle with DVDS

    I even tried a system restore to restore it back to when everything worked fine and no luck

    I'm going to try using a different brand DVD-R as suggested, even though this batch of sony DVD-Rs has worked for me before

    I also downgraded nero to version 6.6.0.18 and used the inCD clean tool afterwards and tried to burn again, here is the log from that:

    here is the log:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0D20 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75FJA1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163B D: CDRom0
    Memorex DVD+/-DLRWL1 F16 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (522240kB)
    Free physical memory: 245MB (250884kB)
    Memory in use : 51 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.10.2006
    ISO compilation
    9:51:44 PM #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    9:51:44 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    9:51:44 PM #3 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+/-DLRWL1 F16 running

    9:51:44 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    9:51:44 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    9:51:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 194271 ( 43:10.21, 379MB)

    9:51:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    9:51:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    9:51:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:51:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 194272 (194272) = #194272/43:10.22
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 194272 blocks [Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    9:51:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 397869056, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    194272 | lead-out | 1 | 0x41 | 0x00

    9:51:56 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    9:51:57 PM #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    9:51:57 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    9:51:57 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    9:51:57 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:51:57 PM #17 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    9:51:57 PM #18 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    9:51:57 PM #19 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:51:57 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:51:59 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C4D0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    9:51:59 PM #22 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    9:51:59 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:51:59 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:51:59 PM #25 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was -1

    9:51:59 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  8. #8
    Im Off To See The Wizard mill's Avatar
    Join Date
    Oct 2005
    Location
    cornfields
    Posts
    1,105
    Keep Plugin away

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Failed burn - Illegal disk error message
    By varflow in forum Nero Recode
    Replies: 5
    Last Post: 18 May 2006, 03:58 AM
  2. Burn process failed! in Nero Vision 2
    By Marcan in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 9
    Last Post: 14 Aug 2005, 03:12 AM
  3. Burn Process Failed Shrink and Nero
    By giveitago in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 35
    Last Post: 25 Oct 2004, 11:40 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •