Announcement

Collapse
No announcement yet.

Slow Burning speeds with Nero 7

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Nelson
    Junior Member
    Junior Member
    • Oct 2006
    • 12

    Slow Burning speeds with Nero 7

    Hi would anyone be able to help?

    I am expericing very slow burning speeds durning Divxs/mpegs from my HD to DVD+R using the latest Nero 7 version. as a example i ve been burning 11 divx files which are about 350mb onto a 4.7g DVD+R at a speed of 16x and this takes about 1hr50 mins (have check with friends and they do it in about 20mins) i Used to get much faster speeds on my older slower pc... i have checked with other sites and fourms and have made sure DMA is ON. on all drives including HD using the Nero Info tool.I had to re-install disk drives to enable the DMA to ON.

    ie
    Primary IDE settings (1)
    Device 0
    Auto Detect
    DMA if available
    Ultra DMA mode 5

    Device 1
    Auto Detection
    DMA if available
    Not applicable

    Primary IDE Settings (2)
    Device 0
    Auto Detection
    DMA Available
    Ultra DMA mode 4

    Device 1
    Auto Detection
    DMA if available
    Ultra DMA Mode 3

    I have a Lite-on DVDRW SHM - 165P63 (Burner) set to Master and it has the latest Firmware and a Lite-on Combo SOHC-5236v (CD-Rom) which is set as a Slave both on the Primary IDE.

    PC Spec....
    INTEL Pentium D 920 (2x 2.8ghz) 800mhz FSB/2 x 2MB Cache
    2MB RAM
    ASUS P5LD2 SE: DUAL DDR2, S-ATA, x16 VGA
    SATA II 160GB Hard Disk
    Microsoft Media Center XP
    External 300g Maxtor Hard drive (for the stored mpegs/music/photos etc)

    I am not sure where to go from here any help would be greatfully appreciated
    Many Thanks in advance.

    If any more info required please ask.
    Last edited by Nelson; 6 Oct 2006, 02:29 AM.
  • Chewy
    Super Moderator
    • Nov 2003
    • 18971

    #2
    welcome to the forum

    use nero vision to convert to dvd files and write to hard drive, time that

    then time burning manually

    Comment

    • Nelson
      Junior Member
      Junior Member
      • Oct 2006
      • 12

      #3
      Thanks Chewy for you reply.

      But my goal is just to back up mpegs onto a dvd r as i have a mpeg/divx standalone dvd player

      Comment

      • Chewy
        Super Moderator
        • Nov 2003
        • 18971

        #4
        post the nero log for the data dvd you burned

        Comment

        • Nelson
          Junior Member
          Junior Member
          • Oct 2006
          • 12

          #5
          I have since shut down nero and not saved the "session" i burnt.... am i able to still to get a log? and is it easy to get one if i look for some instructions on how to go about it?

          Comment

          • Chewy
            Super Moderator
            • Nov 2003
            • 18971

            #6


            from the top of this subforum

            Comment

            • Nelson
              Junior Member
              Junior Member
              • Oct 2006
              • 12

              #7
              Hi Chewy i could nt just copy and paste it into the thread i have attached it as the word .txt file

              thanks
              Attached Files

              Comment

              • LT. Columbo
                Demigod of Digital Video
                • Nov 2004
                • 10671

                #8
                it wouldn't go in because you have the entire log file here is the most recent, and you need to fix the DMA


                i'd also update the firmware to MSOP



                Windows XP 5.1
                IA32
                WinAspi: -
                ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

                NT-SPTI used
                Nero Version: 7.2.7.0
                Internal Version: 7, 2, 7, 0

                Recorder: <LITE-ON DVDRW SHM-165P6S>Version: MS0M - HA 1 TA 0 - 7.2.7.0
                Adapter driver: <IDE> HA 1
                Drive buffer : 2048kB
                Bus Type : default (0) -> ATAPI, detected: ?
                CD-ROM: <LITE-ON DVDRW SHM-165P6S>Version: MS0M - HA 1 TA 0 - 7.2.7.0
                Adapter driver: <IDE> HA 1

                === Scsi-Device-Map ===
                CdRomPeripheral : LITE-ON DVDRW SHM-165P6S atapi Port 0 ID 0 DMA: Off
                CdRomPeripheral : LITE-ON COMBO SOHC-5236V atapi Port 0 ID 1 DMA: On
                DiskPeripheral : WDC WD1600JS-22MHB0 atapi Port 1 ID 0 DMA: On

                === CDRom-Device-Map ===
                LITE-ON DVDRW SHM-165P6S D: CDRom0
                LITE-ON COMBO SOHC-5236V E: CDRom1
                =======================

                AutoRun : 1
                Excluded drive IDs:
                WriteBufferSize: 83886080 (0) Byte
                BUFE : 0
                Physical memory : 2047MB (2096300kB)
                Free physical memory: 1179MB (1208176kB)
                Memory in use : 42
                Uncached PFiles: 0x0
                Use Inquiry : 1
                Global Bus Type: default (0)
                Check supported media : Disabled (0)

                24.9.2006
                UDF/ISO compilation
                15:19:02 #1 Text 0 File Isodoc.cpp, Line 6440
                UDF document burn settings
                ------------------------------------------
                Determine maximum speed : FALSE
                Simulate : FALSE
                Write : TRUE
                Finalize CD : TRUE
                Multisession : FALSE
                Burning mode : DAO
                Mode : 1
                UDF Mode : UDF/ISO bridge
                UDF Options : automatic
                UDF Revision : 1.02
                UDF Partition Type : physical
                ISO Level : 1 (Max. of 11 = 8 + 3 char)
                Character set : ISO 9660
                Joliet : TRUE
                Allow pathdepth more than 8 directories : TRUE
                Allow more than 255 characters in path : TRUE
                Write ISO9660 ;1 file extensions : TRUE

                15:19:02 #2 Text 0 File ThreadedTransfer.cpp, Line 540
                ReadBuffer-Pipe got 262144KB of Memory

                15:19:02 #3 Text 0 File Reader.cpp, Line 124
                Reader running

                15:19:02 #4 Text 0 File Writer.cpp, Line 113
                Writer D: LITE-ON DVDRW SHM-165P6S running

                15:19:02 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
                First writeable address = 0 (0x00000000)

                15:19:02 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
                First writeable address = 0 (0x00000000)

                15:19:02 #7 Text 0 File Burncd.cpp, Line 3405
                Turn on Disc-At-Once, using DVD media

                15:19:03 #8 Text 0 File DlgWaitCD.cpp, Line 298
                Last possible write address on media: 2295103 (510:01.28, 4482MB)
                Last address to be written: 2152943 (478:25.68, 4204MB)

                15:19:03 #9 Text 0 File DlgWaitCD.cpp, Line 310
                Write in overburning mode: NO (enabled: CD)

                15:19:03 #10 Text 0 File DlgWaitCD.cpp, Line 2842
                Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD+R
                Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
                Disc Application Code: 0, Extended Information Indicators: 7

                15:19:03 #11 Text 0 File DlgWaitCD.cpp, Line 482
                >>> Protocol of DlgWaitCD activities: <<<
                =========================================

                15:19:03 #12 Text 0 File ThreadedTransferInterface.cpp, Line 848
                Setup items (after recorder preparation)
                0: TRM_DATA_MODE1 ()
                2 indices, index0 (150) not provided
                original disc pos #0 + 2152944 (2152944) = #2152944/478:25.69
                relocatable, disc pos for caching/writing not required/ required, no patch infos
                -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152944 blocks [D: LITE-ON DVDRW SHM-165P6S]
                --------------------------------------------------------------

                15:19:03 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1063
                Prepare recorder [D: LITE-ON DVDRW SHM-165P6S] for write in CUE-sheet-DAO
                DAO infos:
                ==========
                MCN: ""
                TOCType: 0x00; Session Closed, disc fixated
                Tracks 1 to 1: Idx 0 Idx 1 Next Trk
                1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4409229312, ISRC ""
                DAO layout:
                ===========
                ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
                0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
                0 | 1 | 0 | 0x41 | 2152944 | 0 | 0x00
                0 | 1 | 1 | 0x41 | 2152944 | 0 | 0x00
                2152944 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

                15:19:03 #14 Text 0 File SCSIPassThrough.cpp, Line 39
                SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

                15:19:03 #15 Phase 24 File dlgbrnst.cpp, Line 1730
                Caching of files started

                15:19:03 #16 Text 0 File Burncd.cpp, Line 4236
                Cache writing successful.

                15:19:03 #17 Phase 25 File dlgbrnst.cpp, Line 1730
                Caching of files completed

                15:19:03 #18 Phase 36 File dlgbrnst.cpp, Line 1730
                Burn process started at 12x (16,620 KB/s)

                15:19:03 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2722
                Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

                15:19:03 #20 Text 0 File Cdrdrv.cpp, Line 9096
                ---- DVD Structure: Physical Format Information (00h) ----
                Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
                Book Type: DVD+R (10), Part Version: 1.0x (1)
                Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
                Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
                Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
                Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
                End Physical Sector Number of Data Area: 26053F h
                End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
                Data in Burst Cutting Area (BCA) does not exist
                Disc Application Code: 0 / 0 h
                Extended Information indicators: 7 h
                Disc Manufacturer ID: MCC.....
                Media type ID: 004
                Product revision number: 0
                Number of Physical format information bytes in use in ADIP up to byte 63: 56
                Media Specific [16..63]:
                00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
                23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
                01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

                15:19:03 #21 Text 0 File DVDR.cpp, Line 6579
                Drive: LITE-ON DVDRW SHM-165P6S
                Book Type request [LO], rev 3: DVD-ROM
                Changing the Book Type was finished successfully, return code 0

                15:19:03 #22 CDR -1207 File DVDR.cpp, Line 6006
                Book Type automatically set to: DVD-ROM

                15:19:03 #23 Text 0 File DVDPlusRW.cpp, Line 662
                Start write address at LBA 0
                DVD high compatibility mode: Yes

                17:03:01 #24 Text 0 File WriterStatus.cpp, Line 116
                <D: LITE-ON DVDRW SHM-165P6S> start writing Lead-Out at LBA 2152944 (20D9F0h), length 0 blocks

                17:03:01 #25 Text 0 File ThreadedTransfer.cpp, Line 229
                all writers idle, stopping conversion

                17:03:25 #26 Text 0 File DVDR.cpp, Line 6579
                Drive: LITE-ON DVDRW SHM-165P6S
                Book Type request [LO], rev 3: DVD+R
                Changing the Book Type was finished successfully, return code 0

                17:03:25 #27 Phase 37 File dlgbrnst.cpp, Line 1730
                Burn process completed successfully at 12x (16,620 KB/s)


                Existing drivers:
                File 'Drivers\PXHELP20.SYS': Ver=2.03.02a, size=19840 bytes, created 10/08/2004 03:39:56 (Prassi/Veritas driver for win 2K)

                Registry Keys:
                HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

                ====== *** Nero Burning ROM, History File *** ======
                Last edited by LT. Columbo; 6 Oct 2006, 03:02 AM.
                "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
                Columbo moments...
                "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
                "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
                (An Exercise In Fatality, 1974)


                Comment

                • Chewy
                  Super Moderator
                  • Nov 2003
                  • 18971

                  #9
                  looks like something's mixed up, what edition of media center?

                  where did the initial dma information come from?

                  is that a branded computer(HP, Dell, etc) or custom built?

                  Comment

                  • Nelson
                    Junior Member
                    Junior Member
                    • Oct 2006
                    • 12

                    #10
                    Its a pc i spec'd up from pcspecialist.com... im just burning a quick 350mb mpeg onto a dvd+r and i will check the log on it and post it on the thread for you. just been having a look at the log and the dates on it seem strange as i burnt dvd last night and today but does not appeat to bo on the log

                    Comment

                    • Chewy
                      Super Moderator
                      • Nov 2003
                      • 18971

                      #11
                      that burn took an hour and 43 minutes

                      what part of nero are you using?
                      that was a data dvd that had 4,200MB

                      Comment

                      • Nelson
                        Junior Member
                        Junior Member
                        • Oct 2006
                        • 12

                        #12
                        its just finished burning but as soon as i go to look at the latest log this is the one i get??? but it still shows as the DMA being On as i have checked

                        Windows XP 5.1
                        IA32
                        WinAspi: -
                        ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
                        NT-SPTI used
                        Nero Version: 7.2.3.2
                        Internal Version: 7, 2, 3, 2
                        Recorder: <LITE-ON DVDRW SHM-165P6S>Version: MS0M - HA 1 TA 0 - 7.2.3.2
                        Adapter driver: <IDE> HA 1
                        Drive buffer : 2048kB
                        Bus Type : default (0) -> ATAPI, detected: ?
                        CD-ROM: <LITE-ON DVDRW SHM-165P6S>Version: MS0M - HA 1 TA 0 - 7.2.3.2
                        Adapter driver: <IDE> HA 1
                        === Scsi-Device-Map ===
                        CdRomPeripheral : LITE-ON DVDRW SHM-165P6S atapi Port 0 ID 0 DMA: On
                        CdRomPeripheral : LITE-ON COMBO SOHC-5236V atapi Port 0 ID 1 DMA: On
                        DiskPeripheral : WDC WD1600JS-22MHB0 atapi Port 1 ID 0 DMA: On
                        === CDRom-Device-Map ===
                        LITE-ON DVDRW SHM-165P6S D: CDRom0
                        LITE-ON COMBO SOHC-5236V E: CDRom1
                        =======================
                        AutoRun : 1
                        Excluded drive IDs:
                        WriteBufferSize: 83886080 (0) Byte
                        BUFE : 0
                        Physical memory : 2047MB (2096300kB)
                        Free physical memory: 789MB (808236kB)
                        Memory in use : 61
                        Uncached PFiles: 0x0
                        Use Inquiry : 1
                        Global Bus Type: default (0)
                        Check supported media : Disabled (0)
                        6.9.2006
                        UDF/ISO compilation
                        19:33:32 #1 Text 0 File Isodoc.cpp, Line 6427
                        UDF document burn settings
                        ------------------------------------------
                        Determine maximum speed : FALSE
                        Simulate : FALSE
                        Write : TRUE
                        Finalize CD : TRUE
                        Multisession : FALSE
                        Burning mode : DAO
                        Mode : 1
                        UDF Mode : UDF/ISO bridge
                        UDF Options : automatic
                        UDF Revision : 1.02
                        UDF Partition Type : physical
                        ISO Level : 1 (Max. of 11 = 8 + 3 char)
                        Character set : ISO 9660
                        Joliet : TRUE
                        Allow pathdepth more than 8 directories : TRUE
                        Allow more than 255 characters in path : TRUE
                        Write ISO9660 ;1 file extensions : TRUE

                        19:33:32 #2 Text 0 File ThreadedTransfer.cpp, Line 531
                        ReadBuffer-Pipe got 262144KB of Memory

                        19:33:32 #3 Text 0 File Reader.cpp, Line 124
                        Reader running

                        19:33:32 #4 Text 0 File Writer.cpp, Line 113
                        Writer D: LITE-ON DVDRW SHM-165P6S running

                        19:33:32 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
                        First writeable address = 0 (0x00000000)

                        19:33:32 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
                        First writeable address = 0 (0x00000000)

                        19:33:32 #7 Text 0 File Burncd.cpp, Line 3400
                        Turn on Disc-At-Once, using DVD media

                        19:33:33 #8 Text 0 File DlgWaitCD.cpp, Line 289
                        Last possible write address on media: 2295103 (510:01.28, 4482MB)
                        Last address to be written: 692671 (153:55.46, 1352MB)

                        19:33:33 #9 Text 0 File DlgWaitCD.cpp, Line 301
                        Write in overburning mode: NO (enabled: CD)

                        19:33:33 #10 Text 0 File DlgWaitCD.cpp, Line 2715
                        Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD+R
                        Disc Manufacturer ID: INFODISC, Media Type ID: R20, Product revision number: 0
                        Disc Application Code: 0, Extended Information Indicators: 3

                        19:33:33 #11 Text 0 File DlgWaitCD.cpp, Line 473
                        >>> Protocol of DlgWaitCD activities: <<<
                        =========================================

                        19:33:33 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
                        Setup items (after recorder preparation)
                        0: TRM_DATA_MODE1 ()
                        2 indices, index0 (150) not provided
                        original disc pos #0 + 692672 (692672) = #692672/153:55.47
                        relocatable, disc pos for caching/writing not required/ required, no patch infos
                        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 692672 blocks [D: LITE-ON DVDRW SHM-165P6S]
                        --------------------------------------------------------------

                        19:33:33 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
                        Prepare recorder [D: LITE-ON DVDRW SHM-165P6S] for write in CUE-sheet-DAO
                        DAO infos:
                        ==========
                        MCN: ""
                        TOCType: 0x00; Session Closed, disc fixated
                        Tracks 1 to 1:
                        1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1418592256, ISRC ""
                        DAO layout:
                        ===========
                        __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
                        0 | lead-in | 0 | 0x41 | 0x00
                        0 | 1 | 0 | 0x41 | 0x00
                        0 | 1 | 1 | 0x41 | 0x00
                        692672 | lead-out | 1 | 0x41 | 0x00

                        19:33:33 #14 Text 0 File SCSIPassThrough.cpp, Line 39
                        SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

                        19:33:33 #15 Text 0 File SCSIPassThrough.cpp, Line 84
                        SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

                        19:33:33 #16 Phase 24 File dlgbrnst.cpp, Line 1730
                        Caching of files started

                        19:33:33 #17 Text 0 File Burncd.cpp, Line 4231
                        Cache writing successful.

                        19:33:33 #18 Phase 25 File dlgbrnst.cpp, Line 1730
                        Caching of files completed

                        19:33:33 #19 Phase 36 File dlgbrnst.cpp, Line 1730
                        Burn process started at 8x (11,080 KB/s)

                        19:33:33 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
                        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

                        19:33:33 #21 Text 0 File Cdrdrv.cpp, Line 8995
                        ---- DVD Structure: Physical Format Information (00h) ----
                        Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
                        Book Type: DVD+R (10), Part Version: 1.0x (1)
                        Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
                        Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
                        Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
                        Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
                        End Physical Sector Number of Data Area: 26053F h
                        End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
                        Data in Burst Cutting Area (BCA) does not exist
                        Disc Application Code: 0 / 0 h
                        Extended Information indicators: 3 h
                        Disc Manufacturer ID: INFODISC
                        Media type ID: R20
                        Product revision number: 0
                        Number of Physical format information bytes in use in ADIP up to byte 63: 56
                        Media Specific [16..63]:
                        00 00 03 49 4E 46 4F 44 - 49 53 43 52 32 30 00 38 ...INFODISCR20.8
                        23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
                        01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

                        19:33:33 #22 Text 0 File DVDR.cpp, Line 6444
                        Drive: LITE-ON DVDRW SHM-165P6S
                        Book Type request [LO], rev 3: DVD-ROM
                        Changing the Book Type was finished successfully, return code 0

                        19:33:33 #23 CDR -1207 File DVDR.cpp, Line 5871
                        Book Type automatically set to: DVD-ROM

                        19:33:33 #24 Text 0 File DVDPlusRW.cpp, Line 650
                        Start write address at LBA 0
                        DVD high compatibility mode: Yes

                        19:35:17 #25 SPTI -1135 File SCSIPassThrough.cpp, Line 291
                        D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
                        Sense Key: 0x03 (KEY_MEDIUM_ERROR)
                        Sense Code: 0x0C
                        Sense Qual: 0x00
                        CDB Data: 0x2A 00 00 00 BD 20 00 00 20 00 00 00
                        Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
                        Buffer x05360000: Len x10000
                        0x98 92 7B 7B FD D1 EE 3D FD B3 DE 95 95 4E C0 AA
                        0x42 A8 19 27 AE EF F3 EE 71 49 21 C0 C0 C0 C1 1C
                        0xE4 71 F8 7B 76 A3 CC 38 CB 1C E0 7A 75 F6 FF 00

                        19:35:17 #26 CDR -1135 File Writer.cpp, Line 302
                        Write error
                        D: LITE-ON DVDRW SHM-165P6S

                        19:35:17 #27 Text 0 File ThreadedTransfer.cpp, Line 228
                        all writers idle, stopping conversion

                        19:35:17 #28 Text 0 File ThreadedTransfer.cpp, Line 222
                        conversion idle, stopping reader

                        19:35:17 #29 Phase 127 File dlgbrnst.cpp, Line 1730
                        Generating DVD high compatibility borders

                        19:35:17 #30 Phase 129 File dlgbrnst.cpp, Line 1730
                        Generating DVD borders completed successfully

                        19:35:17 #31 Text 0 File DVDR.cpp, Line 6444
                        Drive: LITE-ON DVDRW SHM-165P6S
                        Book Type request [LO], rev 3: DVD+R
                        Changing the Book Type was finished successfully, return code 0

                        19:35:17 #32 Phase 38 File dlgbrnst.cpp, Line 1730
                        Burn process failed at 8x (11,080 KB/s)

                        Existing drivers:
                        File 'Drivers\PXHELP20.SYS': Ver=2.03.02a, size=19840 bytes, created 10/08/2004 03:39:56 (Prassi/Veritas driver for win 2K)
                        Registry Keys:
                        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

                        Comment

                        • Nelson
                          Junior Member
                          Junior Member
                          • Oct 2006
                          • 12

                          #13
                          I go into the application select DVD iso and just drag the mpeg files i want to burn into the box and then click the burn option

                          Comment

                          • LT. Columbo
                            Demigod of Digital Video
                            • Nov 2004
                            • 10671

                            #14
                            use nero express, create a DATA dvd. the most recent log will be at the bottom, (so when you go look, you will have to scroll down to the bottom of the page) that attachment you posted has several logs in there, see the FAQ chewy gave you to see how the logs are seperated.
                            Last edited by LT. Columbo; 6 Oct 2006, 03:42 AM.
                            "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
                            Columbo moments...
                            "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
                            "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
                            (An Exercise In Fatality, 1974)


                            Comment

                            • Nelson
                              Junior Member
                              Junior Member
                              • Oct 2006
                              • 12

                              #15
                              Hi Chewy here is some more info if this helps

                              Nero InfoTool 2.07
                              Drive Information
                              ------------------
                              Drive : LITE-ON DVDRW SHM-165P6S
                              Type : DVD-RAM Recorder
                              Firmware Version : MS0M
                              Buffer Size : 2 MB
                              Date : 2006-02-07
                              Serial Number
                              Vendor Specific : 2006/02/07 13:51
                              Drive Letter : D:\
                              Location : 0:0
                              Mechanism : Tray
                              Read Speed : 48 X
                              Write Speed : 48 X
                              Read CD Text : Yes
                              Return C2 Pointers : Yes
                              Read CD-R : Yes
                              Read CD-RW : Yes
                              Read DVD-ROM : Yes
                              Read DVD-RAM : Yes
                              Read DVD-R : Yes
                              Read DVD-RW : Yes
                              Read DVD+R : Yes
                              Read DVD+RW : Yes
                              Read Digital Audio : Yes
                              Read CD+G : No
                              Read VideoCD : Yes
                              Write CD-R : Yes
                              Write CD-RW : Yes
                              Write DVD-R : Yes
                              Write DVD-RW : Yes
                              Write DVD+R : Yes
                              Write DVD+RW : Yes
                              Write DVD-RAM : Yes
                              Buffer Underrun Protection : Yes
                              Mount Rainier : No
                              Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
                              Region Protection Control : RPC I
                              Region : All
                              Changes User
                              Changes Vendor

                              Drive Information
                              ------------------
                              Drive : LITE-ON COMBO SOHC-5236V
                              Type : Combo Drive
                              Firmware Version : R$0C
                              Buffer Size : 1536 KB
                              Date : ?
                              Serial Number : 2005122400058016
                              Vendor Specific : Nov10 ,2005
                              Drive Letter : E:\
                              Location : 0:1
                              Mechanism : Tray
                              Read Speed : 52 X
                              Write Speed : 52, 48, 40, 32, 24, 16, 12, 4 X
                              Read CD Text : Yes
                              Return C2 Pointers : Yes
                              Read CD-R : Yes
                              Read CD-RW : Yes
                              Read DVD-ROM : Yes
                              Read DVD-RAM : No
                              Read DVD-R : Yes
                              Read DVD-RW : Yes
                              Read DVD+R : Yes
                              Read DVD+RW : Yes
                              Read Digital Audio : Yes
                              Read CD+G : No
                              Read VideoCD : Yes
                              Write CD-R : Yes
                              Write CD-RW : Yes
                              Write DVD-R : No
                              Write DVD-RW : No
                              Write DVD+R : No
                              Write DVD+RW : No
                              Write DVD-RAM : No
                              Buffer Underrun Protection : Yes
                              Mount Rainier : Yes
                              Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
                              Region Protection Control : RPC I
                              Region : All
                              Changes User
                              Changes Vendor

                              Interface Information
                              ---------------------
                              Adapter 1
                              ---------
                              Description : Primary IDE Channel
                              Driver
                              Description : system32\DRIVERS\atapi.sys
                              Company : Microsoft Corporation
                              Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
                              Description : IDE/ATAPI Port Driver
                              Attached Devices
                              Description : Master: LITE-ON DVDRW SHM-165P6S
                              Type : CD-Rom Drive
                              DMA : On
                              Autorun : On
                              Description : Slave: LITE-ON COMBO SOHC-5236V
                              Type : CD-Rom Drive
                              DMA : On
                              Autorun : On
                              Adapter 2
                              ---------
                              Description : Secondary IDE Channel
                              Driver
                              Description : system32\DRIVERS\atapi.sys
                              Company : Microsoft Corporation
                              Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
                              Description : IDE/ATAPI Port Driver
                              Attached Devices
                              Description : Master: WDC WD1600JS-22MHB0
                              Type : Disk Drive
                              DMA : On
                              Adapter 3
                              ---------
                              Description : Secondary IDE Channel
                              Driver
                              Description : system32\DRIVERS\atapi.sys
                              Company : Microsoft Corporation
                              Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
                              Description : IDE/ATAPI Port Driver
                              Attached Devices
                              Adapter 4
                              ---------
                              Description : Secondary IDE Channel
                              Driver
                              Description : system32\DRIVERS\atapi.sys
                              Company : Microsoft Corporation
                              Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
                              Description : IDE/ATAPI Port Driver
                              Attached Devices
                              Adapter 5
                              ---------
                              Description : unknown
                              Driver
                              Description
                              Company
                              Version
                              Description
                              Attached Devices
                              Description : Maxtor OneTouch II Disk
                              Type : Disk Drive
                              Description : Generic USB SD Reader USB Device
                              Type : Disk Drive
                              Description : Generic USB CF Reader USB Device
                              Type : Disk Drive
                              Description : Generic USB SM Reader USB Device
                              Type : Disk Drive
                              Description : Generic USB MS Reader USB Device
                              Type : Disk Drive

                              Software Information
                              --------------------
                              Operating System : Windows XP Professional (5.01.2600 Service Pack 2)
                              DirectX : DirectX 9.0c
                              Description : Nero Burning ROM
                              Version : 7, 5, 1, 1
                              Company : Nero AG
                              Version Check : Ok
                              Description : Nero Vision
                              Version : 4,7,0,7
                              Company : Nero AG
                              Description : Nero ShowTime
                              Version : 3, 2, 1, 2
                              Company : Nero AG
                              Description : PowerDVD
                              Version : 6.00.1424
                              Company : CyberLink Corp.

                              Hardware Information
                              --------------------
                              CPU : ?
                              Bus Speed : ?
                              Motherboard : ?
                              System : ?
                              BIOS : ?
                              Memory : 2047 MB
                              Sound : SoundMAX HD Audio O
                              Video : RADEON X550

                              ASPI Information
                              ----------------
                              System ASPI : ASPI is not installed
                              Nero ASPI : ASPI is installed and working properly
                              wnaspi32.dll : 2.0.1.74 164112 bytes November 02, 2004

                              Comment

                              Working...
                              😀
                              🥰
                              🤢
                              😎
                              😡
                              👍
                              👎