Showing results 1 to 7 of 7

Thread: Need Help With Dvd Shrink Please!!!!!!!!!

  1. #1
    Junior Member
    Junior Member

    Join Date
    Sep 2006
    Posts
    6

    Default Need Help With Dvd Shrink Please!!!!!!!!!

    I didn't know how to respond so Ive started a new thread. I'm not the brightest bulb on the xmas tree. As I said earlier, my copies always skip and freeze and it tends to be okay in the beginning, but it gets worse as the dvd goes on. It's not always at it's worst at the end, but it usually starts deteriorating in the middle, gets better for a while and then gets alot worse. Its not always like that, but that tends to be the norm. I've pasted the burn log below in the hope that someone can help.

    Black Tower
    Compaq
    Nero Serial Removed*
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27/10/2004 2:35:32 AM
    Nero Version: 6.6.0.15
    Internal Version: 6, 6, 0, 15e
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS10 - HA 1 TA 0 - 6.6.0.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <HL-DT-ST CD-ROM GCR-8481B>Version: 1.06 - HA 1 TA 1 - 6.6.0.15
    Adapter driver: <atapi> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SV6003H atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW SH-W162C atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8481B atapi Port 1 ID 1 DMA: Off
    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW SH-W162C E: CDRom0
    HL-DT-ST CD-ROM GCR-8481B D: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 503MB (515568kB)
    Free physical memory: 100MB (102992kB)
    Memory in use : 80 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    15.10.2006
    UDF/ISO compilation
    7:35:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    7:35:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    7:35:17 PM #3 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    7:35:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    7:35:17 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    7:35:17 PM #6 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW SH-W162C running

    7:35:17 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    7:35:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    7:35:17 PM #9 Text 0 File Burncd.cpp, Line 3231
    Turn on Disc-At-Once, using DVD media

    7:35:18 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2227743 (495:03.18, 4351MB)

    7:35:18 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    7:35:18 PM #12 Text 0 File DlgWaitCD.cpp, Line 2457
    Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    7:35:18 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:35:18 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2227744 (2227744) = #2227744/495:3.19
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227744 blocks [TSSTcorp CD/DVDW SH-W162C]
    --------------------------------------------------------------

    7:35:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562419712, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2227744 | lead-out | 1 | 0x41 | 0x00

    7:35:18 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    7:35:18 PM #17 Text 0 File Burncd.cpp, Line 4116
    Cache writing successful.

    7:35:18 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    7:35:18 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    7:35:18 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:35:18 PM #21 Text 0 File DVDR.cpp, Line 2340
    Recording mode: Sequential Recording Mode

    7:35:18 PM #22 Text 0 File Mmc.cpp, Line 21627
    Set BUFE: Super Link -> ON

    7:35:18 PM #23 Text 0 File DVDR.cpp, Line 2494
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:35:18 PM #24 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:35:41 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
    19:35:41.125 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

    7:49:50 PM #26 Text 0 File WriterStatus.cpp, Line 116
    <TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2227744 (21FE20h), lenght 0 blocks

    7:49:50 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:49:50 PM #28 Text 0 File DVDR.cpp, Line 2732
    EndDAO: Last written address was 2227743

    7:50:14 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 4x (5,540 KB/s)

    7:50:14 PM #30 Phase 78 File dlgbrnst.cpp, Line 1832
    Data verification started

    7:56:51 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:56:52 PM #32 Phase 80 File dlgbrnst.cpp, Line 1832
    Data verification completed successfully

    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 27/10/2005 6:12:48 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 15, 1, size=99584 bytes, created 13/05/2005 5:03:52 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 15, 1, size=29696 bytes, created 13/05/2005 5:03:30 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 15, 1, size=8704 bytes, created 13/05/2005 5:03:54 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 10:59:44 PM (Adapter driver for rec)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Sometimes the burn fails completely and it always says 'power callibration error'. I don't know what that means, if someone can englighten me I'd appreciate it.
    Thanks and I look forward to the expert advice coming my way.

  2. #2
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Lightbulb

    Nero Version: 6.6.0.15
    Upgrade to 6.6.0.18 if you want to burn directly from shrink or to 6.6.1.4 if you want to burn manually. See my signature for the links.
    Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS10 - HA 1 TA 0 - 6.6.0.15
    TS11 is the latest firmware. Get it here: LINK
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8481B atapi Port 1 ID 1 DMA: Off
    Your DMA on your CD ROM is off. Check my signature about DMA
    Physical memory : 503MB (515568kB)
    Free physical memory: 100MB (102992kB)
    Memory in use : 80 %
    You have a lot of back ground programs running. Turn them off as they may interfer with the burning. See my signature for both links besides Windows XP for some more hints to run leaner!
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 15, 1, size=99584 bytes, created 13/05/2005 5:03:52 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 15, 1, size=29696 bytes, created 13/05/2005 5:03:30 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 15, 1, size=8704 bytes, created 13/05/2005 5:03:54 PM (InCD4 driver for win NT/2K/XP)
    Get rid of the InCD as it is known to conflict with Nero while burning DVDs. See my signature about InCD and Nero. Get the tool to remove it from Nero 6 tools in my signature.
    Last edited by Gary D; 16 Oct 2006 at 09:12 AM Reason: To correct link

  3. #3
    Digital Video Master
    Digital Video Master

    Join Date
    Nov 2005
    Posts
    1,327

    Default

    GaryD,
    GOOD POST!
    Having trouble with the firmware link, though.
    Last edited by jamoskeag3; 16 Oct 2006 at 02:57 AM

  4. #4
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  5. #5
    Junior Member
    Junior Member

    Join Date
    Sep 2006
    Posts
    6

    Default

    I clicked on the link to firmware, and it has a big caution message of how this could destroy my drive. Are you sure this is safe? Am I at risk, particularly as how I have no idea what it all means. Which link to click on to do the download, if it's safe that is?
    Could someone also tellme what 'power callibration error' means please. When the burn fails, that is the message that I get. It happens if I burn directly through DVD shrink, and also sometimes if I burn manually with Nero.

  6. #6
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Default

    Quote Originally Posted by jamoskeag3 View Post
    GaryD,
    GOOD POST!
    Having trouble with the firmware link, though.
    I just corrected it. Thank you LT for posting the correct one.


    Me=>

    I should have tested them after I posted.

  7. #7
    Just Trying To Help soup's Avatar
    Join Date
    Nov 2005
    Location
    Canada Region 1
    Posts
    7,524

    Default

    If you choose to flash the firmware as advised, do it from safe mode with no disc in drive. The very first time that I did it, I had exactly the same thoughts as you did before I took the plunge.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •