Showing results 1 to 2 of 2

Thread: "illegal disk"

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    1

    Red face-2 "illegal disk"

    I enjoyed the luxery of burning with nero suite and shrink for a long time, then all of a sudden i started to get error messages. I deleted everything and started from scratch. After reconfiguring I receive an error message every time I tried burning into blank DVDs. The tryed using one of the old blanks (memorex 8x) that I used before and it worked fine but the new ones (Memorex 16x) get an "illegal disk" message. The worst part is I can't find the old dvds anywhere for purchase. PLEASE HELP!

    here is the error message:

    (ATTACHMENT)

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
    Nero API version: 6.6.0.13
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 13c

    Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.6.0.13
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : QUANTUM FIREBALLP LM30 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    _NEC DVD_RW ND-2500A D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 32505856 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 191MB (196016kB)
    Free physical memory: 102MB (104892kB)
    Memory in use : 46 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    31.10.2006
    NeroAPI
    12:02:03 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    12:02:03 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    12:02:03 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    12:02:04 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    12:02:04 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:02:04 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    12:02:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    12:02:05 PM #8 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    12:02:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1568527 (348:33.52, 3063MB)

    12:02:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO

    12:02:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    12:02:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    12:02:58 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1568528 (1568528) = #1568528/348:33.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1568528 blocks [_NEC DVD_RW ND-2500A]
    --------------------------------------------------------------

    12:02:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [_NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3212345344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1568528 | lead-out | 1 | 0x41 | 0x00

    12:02:58 PM #15 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    12:02:58 PM #16 Text 0 File Burncd.cpp, Line 4051
    Cache writing successful.

    12:02:58 PM #17 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    12:02:58 PM #18 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 2.4x (3,324 KB/s)

    12:02:58 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:02:58 PM #20 Text 0 File DVDR.cpp, Line 2267
    Recording mode: Sequential Recording Mode

    12:02:58 PM #21 Text 0 File Mmc.cpp, Line 21469
    Set BUFE: Buffer underrun protection -> ON

    12:02:58 PM #22 Text 0 File DVDR.cpp, Line 2421
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:02:58 PM #23 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:02:58 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x17 0xEF 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    12:02:58 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765
    Illegal disc

    12:02:58 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
    Could not perform start of Disc-at-once

    12:02:58 PM #27 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 2.4x (3,324 KB/s)

    12:02:58 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    12:02:58 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    Last edited by Chewy; 2 Nov 2006 at 07:16 AM

  2. #2
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    well it's about time for a new burner but that one was a good one

    I downloaded liggy's modified firmware 205C for the 2510(same drive)
    it supports that mid(cmcmag)
    http://liggydee.cdfreaks.com/page/2500/
    third down from top

    it's a bin file you will have to extract it and binflash(bottom left) to as folder
    on your desk top then upgrade your firmware

    I would do it in safe mode, no disks in drive

    be sure and use the win32gui version of binflah

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. TMPGEnc: "Illegal floating decimal point calculation order."
    By JohnGafnea in forum DVD Encoding and Playback
    Replies: 5
    Last Post: 29 Jan 2008, 06:03 AM
  2. Burn error "illegal disk"
    By Blood D in forum Nero Recode
    Replies: 8
    Last Post: 6 Aug 2006, 04:15 AM
  3. Recode BookType & Burn Error "Illegal Disk"
    By MKAH in forum Nero Recode
    Replies: 2
    Last Post: 30 Mar 2005, 05:12 PM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •