Showing results 1 to 8 of 8

Thread: Fails at end of burning process; please see Nero log

  1. #1
    Junior Member
    Junior Member

    Join Date
    Jun 2005
    Location
    Georgia
    Posts
    8

    Question Fails at end of burning process; please see Nero log

    Hi,
    I'd like to get advice on a problem I've just encountered with my burner. A while back, I bought some Memorex DVD-R 16x's that wouldn't work with my burner. On Memorex's advice, I upgraded the firmware for my burner, and I was able to successfully burn a disc from that batch. I've now tried again, and only 1 out of 4 attempts have been successful. I use DVD Shrink linked to Nero to burn, and the burn process keeps failing at the end (ruining the disc, of course ). The one time out of those 4 it burned was when I was burning from files saved to my hard drive rather than going directly from the source disc. But I've since tried doing that again with no luck. I'm wondering if anyone thinks this could be another firmware problem or something else. I'd greatly appreciate any help.

    Thanks,
    Meghan

    Nero log to follow in a reply since it's too long to be included...

  2. #2
    Junior Member
    Junior Member

    Join Date
    Jun 2005
    Location
    Georgia
    Posts
    8

    Default

    First part of log:

    Nero Serial Removed
    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 4:03:36 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero API version: 6.3.0.3
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <SONY DVD RW DW-D22A> Version: BYS3 - HA 1 TA 1 - 6.3.0.3
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    <o:p></o:p>
    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00GVC0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 1 ID 1 DMA: On
    <o:p></o:p>
    === CDRom-Device-Map ===
    JLMS XJ-HD166S D: CDRom0
    SONY DVD RW DW-D22A E: CDRom1
    =======================
    <o:p></o:p>
    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 958MB (981476kB)
    Free physical memory: 467MB (478480kB)
    Memory in use : 51 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    <o:p></o:p>
    28.10.2006
    NeroAPI
    1:03:59 PM #1 Phase 112 File APIProgress.cpp, Line 253
    DVD-Video files reallocation started

    1:03:59 PM #2 Phase 114 File APIProgress.cpp, Line 253
    DVD-Video files reallocation completed (no file modified)

    1:03:59 PM #3 Phase 111 File APIProgress.cpp, Line 253
    DVD-Video files sorted

    1:03:59 PM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    1:03:59 PM #5 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DW-D22A running

    1:03:59 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    1:03:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    1:03:59 PM #8 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-At-Once, using DVD media

    1:04:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    1:04:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    1:04:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: SONY DVD RW DW-D22A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    1:04:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:04:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DW-D22A ]
    --------------------------------------------------------------

    1:04:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [SONY DVD RW DW-D22A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    1:04:00 PM #15 Phase 24 File APIProgress.cpp, Line 253
    Caching of files started

    1:04:00 PM #16 Text 0 File Burncd.cpp, Line 4073
    Cache writing successful.

    1:04:00 PM #17 Phase 25 File APIProgress.cpp, Line 253
    Caching of files completed

    1:04:00 PM #18 Phase 36 File APIProgress.cpp, Line 253
    Burn process started at 4x (5,540 KB/s)

    1:04:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:04:00 PM #20 Text 0 File DVDR.cpp, Line 1512
    Recording mode: Sequential Recording Mode

    1:04:00 PM #21 Text 0 File Mmc.cpp, Line 19487
    Set BUFE: Power-Burn -> ON , Generic write control : ON

    1:04:00 PM #22 Text 0 File DVDR.cpp, Line 1643
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:04:00 PM #23 Text 0 File Cdrdrv.cpp, Line 7941
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `...0@P...!.....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

  3. #3
    Junior Member
    Junior Member

    Join Date
    Jun 2005
    Location
    Georgia
    Posts
    8

    Default

    And the rest of the log:

    1:04:24 PM #24 Text 0 File Cdrdrv.cpp, Line 1277
    13:04:24.093 - SONY DVD RW DW-D22A\H1 T1 : Queue again later

    1:18:42 PM #25 Text 0 File WriterStatus.cpp, Line 115
    <SONY DVD RW DW-D22A > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

    1:18:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    1:18:43 PM #27 Text 0 File DVDR.cpp, Line 1847
    EndDAO: Last written address was 2286127

    1:19:20 PM #28 SCSI -1194 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x04
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x04

    1:19:20 PM #29 CDR -1194 File ThreadedTransferInterface.cpp, Line 1659
    PMA update failure

    1:19:20 PM #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1659
    Could not perform end of Disc-at-once

    1:19:20 PM #31 Text 0 File DVDR.cpp, Line 1847
    EndDAO: Last written address was -1

    1:19:20 PM #32 Phase 38 File APIProgress.cpp, Line 253
    Burn process failed at 4x (5,540 KB/s)

    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 4:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K)
    <o:p></o:p>
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    that's a liteon 1653 and you can crossflash it but it's complicated, sony abandoned firmware support 6 months before liteon.

    your call

  5. #5
    Junior Member
    Junior Member

    Join Date
    Jun 2005
    Location
    Georgia
    Posts
    8

    Unhappy

    How much risk is involved with this crossflash? I've got nearly a hundred of these discs, so I hate to just throw them away (doubt they'd have much resale value). But if there won't be clear, step-by-step instructions and relatively low risk of messing up my burner for good, then I think I may just have to settle for buying new media...

  6. #6
    King of Digital Video
    King of Digital Video
    NightTran's Avatar
    Join Date
    Aug 2005
    Location
    eastcoast, on the beach
    Posts
    4,224

    Default

    how about buying new burner?

  7. #7
    Junior Member
    Junior Member

    Join Date
    Jun 2005
    Location
    Georgia
    Posts
    8

    Default

    Unfortunately, that's just not really in the budget right now.

  8. #8
    King of Digital Video
    King of Digital Video
    NightTran's Avatar
    Join Date
    Aug 2005
    Location
    eastcoast, on the beach
    Posts
    4,224

    Default

    old burner and new disc is not a very good combination, buy old disc 8x or under

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CD burning fails
    By sadie1 in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 49
    Last Post: 24 Jul 2009, 11:23 AM
  2. Help Please Nero fails whilst burning
    By elenapaparizou in forum Junior Members/Newbies
    Replies: 11
    Last Post: 15 Apr 2006, 04:22 AM
  3. DVD-R fails but not DVD+RW - NERO
    By warrenlui in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 4
    Last Post: 2 Jan 2004, 11:59 PM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •