Showing results 1 to 15 of 15

Thread: ritekF1-ritek corp

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    3

    Default ritekF1-ritek corp

    ----------------------------------------------------------------------------
    Unique Disc Identifier : [DVD-R:RITEKF1]
    ----------------------------------------------------------------------------
    Disc & Book Type : [DVD-R] - [DVD-R]
    Manufacturer Name : [Ritek Corp.]
    Manufacturer ID : [RITEKF1]
    Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]
    ----------------------------------------------------------------------------
    [ DVD Identifier V5.0.1 - http://DVD.Identifier.CDfreaks.com ]
    ----------------------------------------------------------------------------
    Rubbish. Will only burn, 'reliably', at 4x (supposed to be 16x), and then the results are worse than useless: "no disc", stutters from start, or at best (or worst) gets half way through then start pixellating.

    Can I post my nero burn log here too? Previously I was using Verbatim, fairly successfully, although in the last batch I had there were a few failures. Also. I wanted to use discs supported by my burner, which the riteks supposedly are (I do have the latest firmware). What I don't understand, that being the case, is why there is no media specific code in the nero log. This is one of the few 'successful' burns.



    serial deleted

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <PHILIPS DVDR1660P1> Version: P1.6 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <JLMS XJ-HD166S >Version: DS1A - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    JLMS XJ-HD166S D: CDRom0
    PHILIPS DVDR1660P1 E: CDRom1
    AXV CD/DVD-ROM F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 678MB (694844kB)
    Memory in use : 33 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.11.2006
    Burn DVD Image
    10:53:42 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    10:53:42 #2 Text 0 File Writer.cpp, Line 122
    Writer PHILIPS DVDR1660P1 running

    10:53:42 #3 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    10:53:42 #4 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286038 (508:00.38, 4464MB)

    10:53:42 #5 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    10:53:42 #6 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: PHILIPS DVDR1660P1, Media type: DVD-R
    Disc Manufacturer: RITEKF - 1
    Disc Application Code: 64, Disc Physical Code: 193

    10:53:42 #7 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:53:42 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286039 (2286039) = #2286039/508:0.39
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286039 blocks [PHILIPS DVDR1660P1]
    --------------------------------------------------------------

    10:53:42 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681807872, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286039 | lead-out | 1 | 0x41 | 0x00

    10:53:42 #10 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    10:53:42 #11 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    10:53:42 #12 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    10:53:42 #13 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    10:53:42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:53:42 #15 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    10:53:42 #16 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    10:53:42 #17 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:53:42 #18 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:10:33 #19 Text 0 File WriterStatus.cpp, Line 116
    <PHILIPS DVDR1660P1 > start writing Lead-Out at LBA 2286039 (22E1D7h), lenght 0 blocks

    11:10:33 #20 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:10:33 #21 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 2286031

    11:11:11 #22 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 04/03/2005 11:09:03 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    thanks, jamtoday

  2. #2
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    I am pretty sure that's benq 1650

    try some sony 16x dvd+r's and the verbatim same type

    Recorder: PHILIPS DVDR1660P1, Media type: DVD-R
    Disc Manufacturer: RITEKF - 1
    welcome to the forum and congrats on getting a benq 1650, they gone now

    everything is fine, it's just crap media and those phillips/benq's are picky

    with good media the benq burns great at 8x and sometimes even 12x

  3. #3
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    3

    Default re ritek

    Thanks for the welcome and remarks. I don't know anything about benq. Yes I am pretty sure it's the media which are bad. Still puzzled as to why the burner didn't recognize them (according to the media specific section of the nero log). Philips list of approved media for the burner does seem to be a pretty esoteric one, most of which I've never heard of. By the way, I need dvd-r for my player. Sony16d1 is on the list. I don't know yet if they are easy to come by.

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    see if you can bum a dvd+r and bitsett to dvd-rom, or have someone else
    loan you a disk done that way and test on your standalone

    btw nero did identify the blank's mid, that's what I quoted from your log, and that mid is well known and your burner/firmware very recent

    benq and phillips are partners

  5. #5

  6. #6
    King of Digital Video
    King of Digital Video
    NightTran's Avatar
    Join Date
    Aug 2005
    Location
    eastcoast, on the beach
    Posts
    4,224

    Default

    how about cross flash to Benq 1650 then burn them at 8x?

  7. #7
    just farted
    Join Date
    Aug 2004
    Location
    dumpster behind mcdonalds
    Posts
    314

    Default

    agreed... i'd crossflash it to a DW1650 so youll be able to use BenQ firmware, as well as BenQ's utility called Qsuite where youll be able to overspeed and use BenQ's technology called Solidburn, which is great for media that is variable in quality.

  8. #8
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    many people find the Phillips firmware to be just as good as Benq, it's best to find premium media and test then only crossflash if needed. A lot of people go back to Phillips after using benq firmware.

  9. #9
    just farted
    Join Date
    Aug 2004
    Location
    dumpster behind mcdonalds
    Posts
    314

    Default

    i have not tried philips firmware with my DW1650 (sold it) nor have i with my DW1640, so i cannot comment. however, seems like a lot of people still like BenQ firmware on various messageboards i've seen (cdrlabs and cdreaks in particular).

    also, i recommended BenQ firmware because of solidburn via BenQ's utility, Qsuite. it may help achieve better results with the media the OP is having problems with.

  10. #10
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    you have to look at the poster's level of experience and expertiese tho

  11. #11
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    3

    Default re: ritek

    Thanks again Chewy, and everybody else.

    You're right that the log shows the burner identified the disc. I've just remembered what guide I was following. It's at digital-digest.com, and according to that a good burn should have something besides 0s in the media specific section of the log: that's at the end of #18 in the nero log I gave.
    Anyway the proof is in the pudding, and a crap burn is a crap burn whatever the log says. I think for the time being I'll go back to the verbatim and just burn at 8x. At 16x it scarcely reaches that speed anyway, I think -- there's some smartburn feature which is supposed to stop it going too fast.

    Jam

  12. #12
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    have you updated that firmware?

    I would have installed the phillips as standalone master on the second ide,
    you were slaved to an inferior drive that was running in pio mode and using in an older computer(maybe with weak power supply)?

    If you flashed then reflash with drive hooked as I reccomended, from safe mode, no disks in drive, if not then at least test again, no multitasking, shut down all non essential processes and try a burn at 8X.

    Make sure you change the cable and jumper and have the drive hooked to a power connector
    all by itself and at the end of the ide cable



    if it's good verfiy with scan disk

  13. #13
    King of Digital Video
    King of Digital Video
    NightTran's Avatar
    Join Date
    Aug 2005
    Location
    eastcoast, on the beach
    Posts
    4,224

    Default

    I never have Philip firmware for 1640 or 165- but the Benq 1620 firmware is way better then the philip

  14. #14
    just farted
    Join Date
    Aug 2004
    Location
    dumpster behind mcdonalds
    Posts
    314

    Default

    Quote Originally Posted by Chewy View Post
    you have to look at the poster's level of experience and expertiese tho
    i know... im not a noob ;].

    i still see A LOT of people still use BenQ firmware, including the senior members/mods etc. ive been a member of the cdfreaks/cdrlabs for a while now.
    Last edited by rahzel; 5 Nov 2006 at 07:35 AM

  15. #15
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    http://club.cdfreaks.com/showpost.ph...9&postcount=15

    zebadee is strong with the force and benq's

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ritek Go5
    By FrankC in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 3
    Last Post: 20 Feb 2006, 09:17 PM
  2. 16 x ritek?
    By Chewy in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 5
    Last Post: 12 Oct 2005, 03:59 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •