Showing results 1 to 10 of 10

Thread: Randomly stops burning

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default Randomly stops burning

    My dvd burner stops working at a random spot when I try to put big files on the disk. I usually use Nero, but I tryed other programs as well, so i dont think that its the software's fault. It seems to work fine for few min, but then the progress bar just stops moving and nothing happens- the light on the burner keeps flashing like before and there is no message telling me wtf is happening. This is really frustrating for me, i waste about 5 disks per one that actually finnishes burning sucessfully. I had the same problem with my previous burner too, and when I replaced it with this one, it actually stopped the same way when I was testing it as the store (but it resumed and finnished buring the small file few min later). Here is a log of my latest attempt with nero...Ask for more info if needed, but please help me!

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'F:\nero\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 6:18:06 PM
    Nero version: 6.3.1.6 (Nero Express)
    Recorder: <sony dvd="" rw="" dw-d26a=""> Version: JYS1 - HA 1 TA 0 - 6.3.1.6
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <hl-dt-st dvd-rom="" gdr8162b="">Version: 0015 - HA 1 TA 1 - 6.3.1.6
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75FRA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SONY DVD RW DW-D26A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-RW GCE-8525B D: CDRom0
    SONY DVD RW DW-D26A E: CDRom1
    HL-DT-ST DVD-ROM GDR8162 H: CDRom2
    Generic DVD-ROM I: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 1023MB (1048092kB)
    Free physical memory: 575MB (589120kB)
    Memory in use : 43 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.11.2006
    ISO compilation
    9:33:55 PM #1 Text 0 File Isodoc.cpp, Line 6062
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    9:33:55 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    9:33:55 PM #3 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DW-D26A running

    9:33:55 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3898
    First writeable address = 0 (0x00000000)

    9:33:55 PM #5 Text 0 File Burncd.cpp, Line 3198
    Turn on Disc-at-once, using DVD media

    9:33:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1514063 (336:27.38, 2957MB)

    9:33:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    9:33:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: SONY DVD RW DW-D26A, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    9:33:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:33:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1514064 (1514064) = #1514064/336:27.39
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1514064 blocks [SONY DVD RW DW-D26A ]
    --------------------------------------------------------------

    9:33:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [SONY DVD RW DW-D26A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3100803072, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1514064 | lead-out | 1 | 0x00 | 0x41

    9:33:56 PM #12 Phase 24 File dlgbrnst.cpp, Line 1841
    Caching of files started

    9:33:56 PM #13 Text 0 File Burncd.cpp, Line 4214
    Cache writing successful.

    9:33:56 PM #14 Phase 25 File dlgbrnst.cpp, Line 1841
    Caching of files completed

    9:33:56 PM #15 Phase 36 File dlgbrnst.cpp, Line 1841
    Burn process started at 6x (8,280 KB/s)

    9:33:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:33:56 PM #17 Text 0 File Cdrdrv.cpp, Line 8002
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified=""> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    9:33:56 PM #18 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: No

    9:55:57 PM #19 Phase 40 File dlgbrnst.cpp, Line 1531
    Aborted by user

    9:56:37 PM #20 Phase 39 File dlgbrnst.cpp, Line 1841
    Burn process aborted</not></atapi></hl-dt-st></atapi></sony>

  2. #2
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    have you tried to update the firmware to JYS2?
    http://forum.rpc1.org/dl_firmware.php?download_id=2081
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  3. #3
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    I have no idea what that means, but in the link it says that its dangerous. Are you sure that this filmware thing can have something to do with the problem and how exactly do i do it without frying my burner?

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    can we have a whole log, that one ends with aborted by user

  5. #5
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    thats basically how it ends, with this at the end, ending off with the location fo registry keys

    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)

  6. #6
    Just Trying To Help soup's Avatar
    Join Date
    Nov 2005
    Location
    Canada Region 1
    Posts
    7,524

    Default

    If you choose to flash the firmware, do it in safe mode with no discs in drive.


  7. #7
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    1. have you upgraded the power supply since adding those drives and ram?
    2. un hook the other 2 drives before flashing the firmware and follow soup's directions
    3. are you trying to burn a data disk, or a video disk from an iso?
    4. there's way too much running in the background, shut some off and free up some resources
    5. that sonic/recordnow might be causing conflicts
    6. for now upgrade to nero to 6.6.0.18
    http://forum.digital-digest.com/showthread.php?t=62465

    let's get this burner to work

    if these steps don't help then we need to kill the sonic program/drivers

  8. #8
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    Quote Originally Posted by Chewy View Post
    1. have you upgraded the power supply since adding those drives and ram?
    2. un hook the other 2 drives before flashing the firmware and follow soup's directions
    3. are you trying to burn a data disk, or a video disk from an iso?
    4. there's way too much running in the background, shut some off and free up some resources
    5. that sonic/recordnow might be causing conflicts
    6. for now upgrade to nero to 6.6.0.18
    http://forum.digital-digest.com/showthread.php?t=62465

    let's get this burner to work

    if these steps don't help then we need to kill the sonic program/drivers
    1. Nope, havent upgraded power supply, that actually seems like a possible cause. Will disabling the other drives and possible other hardware during the burning prosess help out much? How is it done through the computer (without actually opening up the box and disconnecting them.

    2. Will probably try this, but not today.

    3. The last 10 or so times I tryed to burn divx movies to data disk, this is my first attempt at putting multiple disks of a non- dvd format on a disk. Before that, I had this problem when burning movies with DVD Shrink.

    4. Yeah, I try this every time. I shut down unneeded processes that use up ram and I even disconnect the internet. Sometimes it helps, but It still freezes like 8-% of the time.

    5. What?

    6. Updating as we speak.

  9. #9
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
    these are all drivers running while nero tries to burn and they come from another burning program, usually related to sonic/recordnow/veritas or some other crap

    do no good and cause a lot of conflicts, nero uses it's own aspi driver and causes no system conflicts

    you'll have to open the computer and physically unhook the other optical drives, probably a lot of dust bunnies slowing fans and sapping power also

    make sure the dvd burner is hooked to a power connector closest to the power supply and not sharing with other connections
    Last edited by Chewy; 13 Nov 2006 at 10:53 AM

  10. #10
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    Quote Originally Posted by Chewy View Post
    these are all drivers running while nero tries to burn and they come from another burning program, usually related to sonic/recordnow/veritas or some other crap

    do no good and cause a lot of conflicts, nero uses it's own aspi driver and causes no system conflicts

    you'll have to open the computer and physically unhook the other optical drives, probably a lot of dust bunnies slowing fans and sapping power also

    make sure the dvd burner is hooked to a power connector closest to the power supply and not sharing with other connections
    REALLY good advice, thats man! Ill try it as soon as I buy new disks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Burning to DL stops at 50%
    By glong86 in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 14
    Last Post: 26 Oct 2005, 10:53 PM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •