Showing results 1 to 5 of 5

Thread: I have problems burning DVD's, burns CD's perfect.

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    3

    Default I have problems burning DVD's, burns CD's perfect.

    Ok so I've been having trouble burning DVD's lately. Im using Nero 6 and everytime I try to burn a DVD the buffer bar never goes up and always crashes after about a minute into the process. I've wasted 6 DVD's so far and I dont plan on wasting any more. I'm using pretty good media so I dont know what the problem is, as I've stated the burner burns CD's perfectly. Here is the Nero log.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 11:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
    Nero version: 6.3.1.20
    Recorder: <_NEC DVD_RW ND-3540A> Version: 1.01 - HA 1 TA 1 - 6.3.1.20
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <COMPAQ DVD-ROM GD-8000 >Version: 0011 - HA 1 TA 0 - 6.3.1.20
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : FUJITSU MPA3026ATU atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : COMPAQ DVD-ROM GD-8000 atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : _NEC DVD_RW ND-3540A atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : MW2522N FME851P 2.0B vaxscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    COMPAQ DVD-ROM GD-8000 E: CDRom0
    _NEC DVD_RW ND-3540A F: CDRom1
    MW2522N FME851P G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260528kB)
    Free physical memory: 68MB (69948kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    15.11.2006
    ISO compilation
    12:51:11 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:51:11 PM #2 Text 0 File Reader.cpp, Line 126
    Reader running

    12:51:11 PM #3 Text 0 File Writer.cpp, Line 124
    Writer _NEC DVD_RW ND-3540A running

    12:51:11 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:51:12 PM #5 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-at-once, using DVD media

    12:51:12 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2290431 (508:59.06, 4473MB)

    12:51:12 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    12:51:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: _NEC DVD_RW ND-3540A, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    12:51:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:51:12 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2290432 (2290432) = #2290432/508:59.7
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2290432 blocks [_NEC DVD_RW ND-3540A ]
    --------------------------------------------------------------

    12:51:12 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [_NEC DVD_RW ND-3540A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4690804736, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2290432 | lead-out | 1 | 0x00 | 0x41

    12:51:13 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    12:51:13 PM #13 Text 0 File Burncd.cpp, Line 4183
    Cache writing successful.

    12:51:13 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    12:51:13 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 6x (8,310 KB/s)

    12:51:13 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:51:13 PM #17 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 9:29,555 (569555ms) -> OK

    12:51:13 PM #18 Text 0 File DVDR.cpp, Line 1942
    Recording mode: Sequential Recording Mode

    12:51:13 PM #19 Text 0 File Mmc.cpp, Line 20531
    Set BUFE: supported -> ON

    12:51:13 PM #20 Text 0 File DVDR.cpp, Line 2083
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:51:13 PM #21 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:51:19 PM #22 Text 0 File Cdrdrv.cpp, Line 1294
    12:51:19.656 - _NEC DVD_RW ND-3540A\H1 T1 : Queue again later

    12:52:24 PM #23 SCSI -1093 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03940000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    12:52:24 PM #24 CDR -1093 File Writer.cpp, Line 304
    No seek complete

    12:52:24 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    12:52:24 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    12:52:24 PM #27 Text 0 File DVDR.cpp, Line 2325
    EndDAO: Last written address was -1

    12:52:25 PM #28 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    12:52:25 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    12:52:25 PM #30 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 6x (8,310 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 11:06:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  2. #2
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    3

    Default

    Also I only started having problems after I installed the lastest version of Download Accelerator. I dont know if that was the cause or not, but that was the only signinficant change that I did to the computer. I have since unistalled that piece of crap but the burner still doest work.

  3. #3
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    welcome to the forum

    first let's change that dvd burner to standalone master on the cable(at the end)

    thyen we need to update the firmware, that's fairly new media(blanks)
    download and extract 1WB
    http://liggydee.cdfreaks.com/page/3540/
    fast has riplocked removed
    rpc1 is region free

    http://club.cdfreaks.com/showthread.php?t=120934

    boot into safe mode with drive empty an update

  4. #4
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    3

    Default

    Well I updated the firmware, not through the link you prodivded though, I went to the offical website and the drive still didnt work. I didnt set it to master drive though, cause I dont see how that would make a difference considereng how its always been my slave and it still burns CD's. Once again I tried simulating it first and everything went as planned, so I decided to burn it and once again the buffer level meter never went up and got the same error.

    Is it maybe something to do with Nero's options or what?>

  5. #5
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    my directions to flash firmware come from official nec requirements



    drive may be dying, but you could also try wiping nero and using their clean tool and reinstalling from scratch


    http://forum.digital-digest.com/showthread.php?t=62465

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Creating Menu for Divx Cd's and Dvd's !!
    By ila420 in forum General Discussions
    Replies: 1
    Last Post: 24 Sep 2006, 04:35 AM
  2. Can burn cd's but not dvd's
    By bigggt in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 8
    Last Post: 11 Jul 2006, 11:28 AM
  3. DVDrs Started Skipping After Honestly 200-300 Perfect Burns...
    By peckwest1 in forum General Discussions
    Replies: 5
    Last Post: 5 Apr 2006, 07:42 AM
  4. DVD Decrypter 3.1.9 perfect burns at 2X vs MAX - No lost time
    By HDTiVo in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 0
    Last Post: 8 Feb 2004, 03:16 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •