Showing results 1 to 9 of 9

Thread: Help

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default Help

    I didnt know where else to post this but I have been at this for over 48 hours and yet to find a solution, I am trying to use my dvd shrink 3.1 with my nero it was working just fine for a while and then it started giving me this error log
    Nero Serial Removed*
    Nero Serial Removed*
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 5:54:31 AM
    NT-SPTI used
    Nero API version: 6.6.1.6
    Using interface version: 6.0.0.0
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 1, 6d
    Recorder: <Memorex DVD+-RAM 510L v1>Version: MWS7 - HA 1 TA 1 - 6.6.1.6
    Adapter driver: <USB 2.0> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IC25N060ATMR04-0 atapi Port 1 ID 0 DMA: On
    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4243N D: CDRom0
    Memorex DVD+-RAM 510L v1 E: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523624kB)
    Free physical memory: 391MB (400612kB)
    Memory in use : 23 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    17.11.2006
    NeroAPI
    10:06:18 PM #1 Phase 111 File APIProgress.cpp, Line 275
    DVD-Video files sorted

    10:06:21 PM #2 NEROAPI 7 File Burncd.cpp, Line 3095
    Error:\nCannot connect TRF.

    10:06:21 PM #3 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    10:06:21 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.

    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.129 , size=24698 bytes, created 10/16/2003 8:15:18 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 0, size=102016 bytes, created 1/17/2006 11:09:34 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 0, size=29440 bytes, created 1/17/2006 11:09:28 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 0, size=8704 bytes, created 1/16/2006 6:41:20 PM (InCD4 driver for win NT/2K/XP)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    then I try after it is already encoded I try to brun it directly from nero to a clean dvd-r and it gives me this error

    Nero Serial Removed*
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 5:54:31 AM
    NT-SPTI used
    Nero Version: 6.6.1.6
    Internal Version: 6, 6, 1, 6d
    (Nero Express)
    Recorder: <Memorex DVD+-RAM 510L v1>Version: MWS7 - HA 1 TA 1 - 6.6.1.6
    Adapter driver: <USB 2.0> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST RW/DVD GCC-4243N>Version: A102 - HA 1 TA 0 - 6.6.1.6
    Adapter driver: <IDE> HA 1
    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IC25N060ATMR04-0 atapi Port 1 ID 0 DMA: On
    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4243N D: CDRom0
    Memorex DVD+-RAM 510L v1 E: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523624kB)
    Free physical memory: 28MB (28788kB)
    Memory in use : 94 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    17.11.2006
    UDF/ISO compilation
    10:34:46 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    10:34:46 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed (no file modified)

    10:34:46 PM #3 Text 0 File Isodoc.cpp, Line 6475
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    10:34:46 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    10:34:46 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    10:34:46 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    10:34:46 PM #7 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+-RAM 510L v1 running

    10:34:46 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    10:34:46 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    10:34:46 PM #10 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    10:34:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    10:34:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    10:34:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: Memorex DVD+-RAM 510L v1, Media type: DVD-R
    Disc Manufacturer: MJC M0 - 05
    Disc Application Code: 64, Disc Physical Code: 193

    10:34:46 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:34:46 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [Memorex DVD+-RAM 510L v1]
    --------------------------------------------------------------

    10:34:46 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [Memorex DVD+-RAM 510L v1] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    10:34:46 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:34:46 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    10:34:46 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    10:34:46 PM #20 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    10:34:46 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    10:34:46 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 16x (22,160 KB/s)

    10:34:46 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:34:46 PM #24 Text 0 File DVDR.cpp, Line 2730
    Recording mode: Sequential Recording Mode

    10:34:46 PM #25 Text 0 File DVDR.cpp, Line 2886
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:34:46 PM #26 Text 0 File Cdrdrv.cpp, Line 8648
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:36:20 PM #27 Text 0 File Cdrdrv.cpp, Line 1200
    22:36:20.734 - E: Memorex DVD+-RAM 510L v1 : Queue again later

    10:38:18 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 289
    E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 01 C0 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x070a0000: Len x10000
    0x00 00 01 BA 44 00 05 32 4C 7D 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 7F 70 06 1E DE F7 71 D1 FF
    0x5E 00 C7 2F C7 77 1D 76 37 AC 00 54 00 42 08 01

    10:38:18 PM #29 CDR -1046 File Writer.cpp, Line 311
    Illegal disc
    E: Memorex DVD+-RAM 510L v1

    10:38:19 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:38:20 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    10:38:21 PM #32 Text 0 File DVDR.cpp, Line 3126
    EndDAO: Last written address was 447

    10:38:21 PM #33 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 16x (22,160 KB/s)

    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.129 , size=24698 bytes, created 10/16/2003 8:15:18 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    please help I have uninstalled nero and dvd shrink twice I swapped the burner also I have used different brand media and yet nothing..what do I do?

  2. #2
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    brand new burner, new firmware, but off the wall blanks(unknown)

    http://www.videohelp.com/dvdmedia.ph...%20M005....%20

    one comment

    have you tried any verbatim disks?

  3. #3
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    No I havent but its not the disks I have tried 3 different brands

  4. #4
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Default

    I noticed you have InCD installed. Even though this is supplied by Nero, it conflicts when burning. Remove it from your system. See my signature about InCD and Nero. And remove the Roxio with roxy zap.

    It is weird that different drivers show up in 2 different burns.

    EDIT: BTW Chewy, did you noticed 6.6.1.6 for the version #?
    6.6.1.4 is still at Nero 6 updates only

  5. #5
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    Ok will try that but now when I just reinstalled nero it is only giving me option to burn cd's and not dvds....this is driving me crazy...

  6. #6
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Default

    Here is a guide on how to burn DVDs manually by JMET...=> LINK

    It is a great guide but follow it exactly. I have been burning manually for months now and I love it as I set burn speed, # of copies, do double burns, etc., while using it.

  7. #7
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    I know how to do it maunally I tried that it doesnt work but now I cant even do that because it only shows option to record vcd and svcd

  8. #8
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    http://ftp.tpnet.pl/vol/d2/ftp.nero.com/oem/FSC/
    oem version

    does nero even see the memorex external?

  9. #9
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    5

    Default

    I just finished burning directly now I restarting dvd shrink one more time to see if it works thanks for the help

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •