Announcement

Collapse
No announcement yet.

Disabling DMA?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ipaulo
    Super Member
    Super Member
    • Apr 2006
    • 291

    Disabling DMA?

    Hello everyone, I'm trying to update firmware for my Sony DVD RW DRU-800A burner. I've googled and found 800A_KY06.EXE, my present one is KY03. I've haven't had any problems yet at least to my knowledge, but I'm thinking its time to update. Kinda of afraid to do it (if it ain't broke, don't fix it). The instructions look pretty much straight forward. They say to make sure that you disable DMA. How do you do that and is this real needed? Do I disable DMA on start-up in safe mode, in utilities? Or is it as simple as going into Device Manager and switching to PIO only? Also after I've updated do I need to go back and enable DMA or does that happen automatically. Thanks
  • Chewy
    Super Moderator
    • Nov 2003
    • 18971

    #2
    Instead of worrying about it, just boot into safe mode, and funky ide drivers will not load and you will be in pio mode, there's a ton of other bad stuff that
    can't load and interfer with the flash program. Just takes a little longer.

    Comment

    • ipaulo
      Super Member
      Super Member
      • Apr 2006
      • 291

      #3
      Thanks Chewy, I'm new to this so let me see if I got this straight. 1) Run the exe. file 2) boot up in safe mode 3) make sure that DMA is on?

      Comment

      • Chewy
        Super Moderator
        • Nov 2003
        • 18971

        #4
        1. boot into safe mode
        2. dma will be off
        3. run the .exe firmware upgrade(make sure drive is empty)
        4 wait and then reboot into regular mode

        Comment

        • ipaulo
          Super Member
          Super Member
          • Apr 2006
          • 291

          #5
          Chewy, I got it to work, thank you for the help!

          Comment

          Working...
          😀
          🥰
          🤢
          😎
          😡
          👍
          👎