Showing results 1 to 8 of 8

Thread: Can't burn image file with Nero 7 Ultra,error message

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    4

    Default Can't burn image file with Nero 7 Ultra,error message

    Hi Guys,

    First time here,and hello to everyone.

    I am not sure if i am even in the correct forum for this problem but maybe someone can point me in the right direction.

    I was trying to copy a DVD which i have successfully did before but this time Nero 7 Ultra won't burn it for me.

    I've ran it through DVD Decrypter and created an image file then through DVD Shrink to burn it onto a DVD-R disc.

    When DVD Shrink has finished it automatically switch's to Nero and completes cashing the files but when it comes to writing the disc it stated it could not and ejects the disc.

    I don't know if this will help but i copied the log report of the error in the hope someone could enlighten me so will attach it here.

    Newbie here,so guys go easy and thank you for any help.

    Nero Serial Removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

    NT-SPTI used
    Nero API version: 7.0.1.2
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 0, 1, 2

    Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.22 - HA 1 TA 0 - 7.0.1.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-110D atapi Port 0 ID 1 DMA: On
    DiskPeripheral : SAMSUNG SV4084H atapi Port 1 ID 0 DMA: On
    DiskPeripheral : ST380817AS 3.42 viamraid Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-107D D: CDRom0
    PIONEER DVD-RW DVR-110D F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 447MB (458216kB)
    Free physical memory: 14MB (14388kB)
    Memory in use : 96 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.11.2006
    NeroAPI
    17:00:40 #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    17:00:40 #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    17:00:40 #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    17:00:40 #4 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    17:00:40 #5 Text 0 File Reader.cpp, Line 124
    Reader running

    17:00:40 #6 Text 0 File Writer.cpp, Line 113
    Writer D: PIONEER DVD-RW DVR-107D running

    17:00:40 #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    17:00:40 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    17:00:40 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    17:00:40 #10 Text 0 File Burncd.cpp, Line 3302
    Turn on Disc-At-Once, using DVD media

    17:00:41 #11 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    17:00:41 #12 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    17:00:41 #13 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AE1
    Disc Application Code: 64, Disc Physical Code: 193

    17:00:41 #14 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    17:00:41 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [D: PIONEER DVD-RW DVR-107D]
    --------------------------------------------------------------

    17:00:41 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    17:00:41 #17 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    17:00:41 #18 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    17:00:41 #19 Text 0 File Burncd.cpp, Line 4132
    Cache writing successful.

    17:00:41 #20 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    17:00:41 #21 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 8x (11,080 KB/s)

    17:00:41 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    17:00:41 #23 Text 0 File DVDR.cpp, Line 2580
    Recording mode: Sequential Recording Mode

    17:00:41 #24 Text 0 File MMC.cpp, Line 21611
    Set BUFE: Buffer underrun protection -> ON

    17:00:41 #25 Text 0 File DVDR.cpp, Line 2735
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    17:00:41 #26 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    17:00:53 #27 Text 0 File Cdrdrv.cpp, Line 1197
    17:00:53.343 - D: PIONEER DVD-RW DVR-107D : Queue again later

    17:01:30 #28 SPTI -1135 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 0C
    Buffer x00bc0000: Len x10000
    0x00 00 01 BA 44 00 3E CD B6 03 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 46 FE 80 02 07 E9 82 07 DA
    0x91 C1 03 EE C5 82 07 E1 80 14 02 00 17 F4 46 E3

    17:01:30 #29 CDR -1135 File Writer.cpp, Line 302
    Write error
    D: PIONEER DVD-RW DVR-107D

    17:01:30 #30 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    17:01:33 #31 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    17:01:33 #32 Text 0 File DVDR.cpp, Line 2978
    EndDAO: Last written address was 767

    17:01:33 #33 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 8x (11,080 KB/s)

    17:01:34 #34 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    17:01:34 #35 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25/08/2006 03:47:00
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25/08/2006 03:47:00 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  2. #2
    Just Trying To Help soup's Avatar
    Join Date
    Nov 2005
    Location
    Canada Region 1
    Posts
    7,524

    Default

    Try reading The Golden Rules & it also wouldn't hurt to check if your Nero is up to date.


  3. #3
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    4

    Default

    Hi Soup,thank you for the reply.

    Looked in the "Golden Rules" thread and there was only one difference there from my setup.

    It was to do with DMA(which i know nothing about)settings they differ from my own.

    These are my own private DVD's i wish to copy and as stated had no problem burning previous projects.

    I am using "Datawrite 8xDVD-R media and they are compatible with my burners.
    Attached Images Attached Images

  4. #4
    Digital Video Enthusiast
    Digital Video Enthusiast
    volfann's Avatar
    Join Date
    Jun 2006
    Location
    On Beautiful Tims Ford Lake
    Posts
    384

    Default

    You should try to free up some memory. too much crap running,,


    Physical memory : 447MB (458216kB)
    Free physical memory: 14MB (14388kB)
    Memory in use : 96 %



    Rent This Space




  5. #5
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    4

    Default

    Hi Volfann,

    could you tell me how to do that,not very PC wise.

  6. #6
    Digital Video Enthusiast
    Digital Video Enthusiast
    volfann's Avatar
    Join Date
    Jun 2006
    Location
    On Beautiful Tims Ford Lake
    Posts
    384

    Default

    Start by turning off any programs that may be running in the background that are not essential. . Look in lower right side of task bar for icons of running programs.. disconnect from internet while burning and shut down anti virus and firewall if running. Lots of programs suck memory and can be turned off temporarily while you rip and burn. Good Luck



    Rent This Space




  7. #7
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    http://forum.digital-digest.com/showthread.php?t=56373

    Seamey,

    If you are going to make iso's and burn them why not just use dvddecrypter,
    nero 7 is a ram hog and your computer looks like it doesn't have any to spare.

    expect a bad disk every now and then with those blanks

    avoid the auto burn feature also to save resources/ram

  8. #8
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    4

    Default

    Hi Chewy,

    Thank you for the advice on Dcrypter,gonna have to read more on it.
    Looking in the forums and found the "Decrypter" tutorial,so gonna read up on it and try to learn something.

    I thought it was just a matter of putting the ISO file in and burning it to disc,no it wanted me to load the DMS file,did that but the file was to big to burn.

    All this to keep my wee granddaughter happy.


    Took a lot of stuff of my hard drive and freed up about 20GB, transferred it to my slave drive, think i'll invest in an external hard drive and backup everything to there.

    Hope i resolve this soon but will keep trying and keep you all up to date,

    Thank you,

    Seamey.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Nero ultra error
    By refract in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 6
    Last Post: 30 Mar 2005, 08:20 PM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •