Showing results 1 to 14 of 14

Thread: My DVD player won't read my DVD-Rs... going nuts.

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default My DVD player won't read my DVD-Rs... going nuts.

    Hello! I'm not really sure if I'm asking in the right category, but I don't really see where my problem is (wheter it's a hardware or software related issue). Well anyway, here it goes:

    Almost 2 years ago, I bought a new computer wich came with a DVD recorder (said to record any type of media, including dual layer). I used a DVD-R the first time I burnt a movie on a DVD, and the recording went just fine. The DVD could be read in my computer (I think I was using CloneDVD at that time). The thing is whenever I took the disc to my standalone DVD Player (the one plugged to the TV), it would just eject it. It would try to read for a few seconds, and then eject it. I did a few more trials with no success, and somehow ended up trying with a DVD+R, and this worked wonderfully. So I decided that either my player or my burner could only handle DVD+Rs and that was that. I was never much of DVD burning maniac anyway.

    However, I have been planning to start making a DVD library at home, and I've recently run out of DVD+Rs, and these are quite hard to get around where I live. People only have DVD-R, and they all keep saying to me that +R are useless and that I must be doing something wrong. Probably.

    Besides, both my DVD Player, an X-View RG-959 and my DVD burner, apparently an ATAPI DVD DD 2X16X4X16; claim to be hable to handle both -R and +R. When I bought them, both also claimed to be multi-region, but I'm not that sure about that. Whatsmore, I have played many DVD-Rs in my DVD player, either rented or recorded by friends.

    I have done two more trials with DVD-Rs today, one using Nero 6 and the other using DVDDecrypter. Both work on my PC, neither work on the DVD player.

    Maybe it has something to do with the regions? But shouldn't that have been fixed by DVDDecyrpter? I'm really not sure if I'm doing something awfully wrong, all the burning programs I used didn't have that many options to fiddle with.

    This last time I've been using Verbatim discs, but I haven't had any luck with other brands either.

    I don't know, I'm going crazy... I would really appreciate it if anybody could provide some insight... Thank you very much.

    Leo.


    P.S: Here's the Nero Infotool report:

    Nero InfoTool 3.07

    Drive Information
    ------------------
    Drive : ATAPI DVD DD 2X16X4X16
    Type : DVD±R/RW DL Recorder
    Firmware Version : G7H9
    Buffer Size : 2 MB
    Date : ?
    Serial Number
    Vendor Specific :
    Drive Letter : D:\
    Location : 0:0
    Mechanism : Tray
    Read Speed : 40 X
    Write Speed : 40 X

    Read CD Text : Yes
    Return C2 Pointers : No
    Read CD-R : Yes
    Read CD-RW : Yes
    Read DVD-ROM : Yes
    Read DVD-RAM : No
    Read DVD-R : Yes
    Read DVD-RW : Yes
    Read DVD-R DL : No
    Read DVD+R : Yes
    Read DVD+RW : Yes
    Read DVD+R DL : Yes
    Read BD-ROM : No
    Read BD-R : No
    Read BD-RE : No
    Read HD DVD-ROM : No
    Read HD DVD-R : No
    Read HD DVD-RW : No
    Read HD-BURN : No
    Read Digital Audio : Yes
    Read CD+G : Yes
    Read VideoCD : Yes

    Write CD-R : Yes
    Write CD-RW : Yes
    Write DVD-R : Yes
    Write DVD-RW : Yes
    Write DVD-R DL : No
    Write DVD+R : Yes
    Write DVD+RW : Yes
    Write DVD+R DL : Yes
    Write DVD-RAM : No
    Write BD-R : No
    Write BD-RE : No
    Write HD DVD-R : No
    Write HD DVD-RW : No
    Write HD-BURN-R : No
    Write HD-BURN-RW : No
    Buffer Underrun Protection : Yes
    Mount Rainier : No
    SolidBurn : No
    Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96

    Region Protection Control : RPC II
    Region : 4
    Changes User : 4
    Changes Vendor : 4

    Disc Information (D:\)
    -------------------
    Type : - no disc inserted -


    Drive Information
    ------------------
    Drive : NERO IMAGEDRIVE2
    Type : DVD-ROM Drive
    Firmware Version : 2.26
    Buffer Size : 512 KB
    Date : ?
    Serial Number
    Vendor Specific : 
    Drive Letter : E:\
    Location : 4:0
    Mechanism : Tray
    Read Speed : 8 X
    Write Speed : n/a

    Read CD Text : Yes
    Return C2 Pointers : Yes
    Read CD-R : Yes
    Read CD-RW : Yes
    Read DVD-ROM : Yes
    Read DVD-RAM : Yes
    Read DVD-R : Yes
    Read DVD-RW : Yes
    Read DVD-R DL : No
    Read DVD+R : Yes
    Read DVD+RW : Yes
    Read DVD+R DL : No
    Read BD-ROM : No
    Read BD-R : No
    Read BD-RE : No
    Read HD DVD-ROM : No
    Read HD DVD-R : No
    Read HD DVD-RW : No
    Read HD-BURN : No
    Read Digital Audio : Yes
    Read CD+G : Yes
    Read VideoCD : Yes

    Write CD-R : No
    Write CD-RW : No
    Write DVD-R : No
    Write DVD-RW : No
    Write DVD-R DL : No
    Write DVD+R : No
    Write DVD+RW : No
    Write DVD+R DL : No
    Write DVD-RAM : No
    Write BD-R : No
    Write BD-RE : No
    Write HD DVD-R : No
    Write HD DVD-RW : No
    Write HD-BURN-R : No
    Write HD-BURN-RW : No
    Buffer Underrun Protection : No
    Mount Rainier : No
    SolidBurn : No
    Modes : n/a

    Region Protection Control : RPC II
    Region : None
    Changes User : 5
    Changes Vendor : 4

    Disc Information (E:\)
    -------------------
    Type : DVD Video (DVD-R)
    Capacity : 4.13 GB
    Layers : 1
    Version : 1
    Disc Size : 12 cm
    Video Format : NTSC 4:3 (Mpeg 2, 720x480)
    Region(s) : All
    Play Time : 69 minutes (01:09:43)

    File System : ISO9660, UDF
    Title : NEW
    Date : 22 November 2006
    Publisher : n/a
    Application : NERO BURNING ROM


    Drive Information
    ------------------
    Drive : RX3193B LRD294H
    Type : DVD-ROM Drive
    Firmware Version : 1.0
    Buffer Size : 512 KB
    Date : ?
    Serial Number
    Vendor Specific : 
    Drive Letter : G:\
    Location : 5:0
    Mechanism : Tray
    Read Speed : 8 X
    Write Speed : n/a

    Read CD Text : Yes
    Return C2 Pointers : Yes
    Read CD-R : Yes
    Read CD-RW : Yes
    Read DVD-ROM : Yes
    Read DVD-RAM : Yes
    Read DVD-R : Yes
    Read DVD-RW : Yes
    Read DVD-R DL : No
    Read DVD+R : Yes
    Read DVD+RW : Yes
    Read DVD+R DL : No
    Read BD-ROM : No
    Read BD-R : No
    Read BD-RE : No
    Read HD DVD-ROM : No
    Read HD DVD-R : No
    Read HD DVD-RW : No
    Read HD-BURN : No
    Read Digital Audio : Yes
    Read CD+G : Yes
    Read VideoCD : Yes

    Write CD-R : No
    Write CD-RW : No
    Write DVD-R : No
    Write DVD-RW : No
    Write DVD-R DL : No
    Write DVD+R : No
    Write DVD+RW : No
    Write DVD+R DL : No
    Write DVD-RAM : No
    Write BD-R : No
    Write BD-RE : No
    Write HD DVD-R : No
    Write HD DVD-RW : No
    Write HD-BURN-R : No
    Write HD-BURN-RW : No
    Buffer Underrun Protection : No
    Mount Rainier : No
    SolidBurn : No
    Modes : n/a

    Region Protection Control : RPC II
    Region : None
    Changes User : 5
    Changes Vendor : 4

    Disc Information (G:\)
    -------------------
    Type : DVD-ROM
    Capacity : 4.28 GB
    Layers : 1
    Version : 1
    Disc Size : 12 cm

    File System : ISO9660, Joliet
    Title : TombRaiderLegend
    Date : 21 March 2006
    Publisher : Eidos
    Application : Nero Burning ROM


    Interface Information
    ---------------------
    Adapter 1
    ---------
    Description : Primary IDE Channel

    Driver
    Description : system32\DRIVERS\atapi.sys
    Company : Microsoft Corporation
    Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    Description : IDE/ATAPI Port Driver

    Attached Devices
    Description : Master: ATAPI DVD DD 2X16X4X16
    Type : CD-Rom Drive
    DMA : On
    Autorun : On

    Adapter 2
    ---------
    Description : Secondary IDE Channel

    Driver
    Description : system32\DRIVERS\atapi.sys
    Company : Microsoft Corporation
    Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    Description : IDE/ATAPI Port Driver

    Attached Devices
    Description : Master: WDC WD2000JD-00HBB0
    Type : Disk Drive
    DMA : On

    Adapter 3
    ---------
    Description : Primary IDE Channel

    Driver
    Description : system32\DRIVERS\atapi.sys
    Company : Microsoft Corporation
    Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    Description : IDE/ATAPI Port Driver

    Attached Devices

    Adapter 4
    ---------
    Description : Secondary IDE Channel

    Driver
    Description : system32\DRIVERS\atapi.sys
    Company : Microsoft Corporation
    Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    Description : IDE/ATAPI Port Driver

    Attached Devices

    Adapter 5
    ---------
    Description : Unknown Adapter

    Driver
    Description : System32\Drivers\imagedrv.sys
    Company : Ahead Software AG
    Version : 2.29.0.0 built by: WinDDK
    Description : NERO IMAGEDRIVE SCSI miniport

    Attached Devices
    Description : ID 0 (0): NERO IMAGEDRIVE2 2.26
    Type : CD-Rom Drive
    Autorun : On

    Adapter 6
    ---------
    Description : Unknown Adapter

    Driver
    Description : \SystemRoot\System32\Drivers\dtscsi.sys
    Company : n/a
    Version : n/a
    Description : n/a

    Attached Devices
    Description : ID 0 (0): RX3193B LRD294H 1.0
    Type : CD-Rom Drive
    Autorun : On



    Hardware Information
    --------------------
    CPU : Intel Pentium 4 processor 3200 MHz
    Bus Speed : 200 MHz
    Motherboard : Intel D915GUX
    System :
    BIOS : Intel EV91510A.86A.0213.2004.0609.1722
    Memory : 1024 MB (3ns)
    Sound : Realtek HD Audio rear output
    Video : NVIDIA GeForce 6600


    ASPI Information
    ----------------
    System ASPI : ASPI is not installed

    Nero ASPI : ASPI is installed and working properly

    WNASPI32.DLL : 2.0.1.74 164112 bytes November 02, 2004

  2. #2
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    that's a benq 1620 and should burn verbatims very well at 8X

    your firmware is way out of date
    you need G7V9 for your oem model
    http://forum.rpc1.org/dl_firmware.php?download_id=1905

    after extracting boot into safe mode and update the empty drive

    you can use nero infotool to get us the mid code(manufacturer id) after the firmware update on those dvd-r's

    your standalone may just not like dvd-r's, whether the maker claims it does or not

    get us a new burn log of a dvd-r after the firmware upgrade

  3. #3
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    OK, I'll try that. Just one silly question... should my burner have Benq written somewhere? Because it doesn't...

    I'll let you know as soon as I manage.

    Thank you very much!

  4. #4
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    Oh and I forgot, my standalone player does read DVD-R... It's read hundreds of them, from my local rent-store and recorded by friends.

  5. #5
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    http://www.iomagic.com/Firmware/FirmwareDownload.html

    even the iomagic one's are benqs

    your firmware is what tells me which firmware to use

    G7H9>G7K9, G7L9, G7M9, G7T9, G7V9

    see the sequence of the numbering

  6. #6
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    Oh, ok. Thanks for clearing that up.

    So... it's done. Just upgraded it. Here's the new Infotool report (is that what you mean by burn log?):

    Nero InfoTool 3.07
    Drive Information
    ------------------
    Drive : ATAPI DVD DD 2X16X4X16
    Type : DVD±R/RW DL Recorder
    Firmware Version : G7V9
    Buffer Size : 2 MB
    November 02, 2004
    Last edited by Chewy; 23 Nov 2006 at 08:49 AM

  7. #7
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    Oh, the drivers' section of the Infotool report just won't fit in a post, please let me know if you need any specific part.

    Thanks again.

  8. #8
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    well the info tool won't give a disk id report

    another tool cdspeed
    disc info will
    Nero CD-DVD Speed: Disc Info
    Basic Information
    Disc type: : DVD+R
    Book Type : DVD+R
    Manufacturer: : unknown
    MID : YUDEN000 T02 (000)
    Write speeds: : 4 X - 8 X - 8.0 X - 12 X
    Blank Capacity : 4.38 GB
    : 4482 MB
    : 4700375040 bytes
    this part will tell us if the new firmware see the dvd-r's right

    to post a burn log see this guide
    http://forum.digital-digest.com/showthread.php?t=67507

  9. #9
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    OK, here's my last burn log. Anyway, remember that the DVD-R I burn do work in my computer. And I'll post right back the result of my Nero CD-DVD Speed report.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\ARCHIV~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 p.m.
    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    Recorder: <ATAPI DVD DD 2X16X4X16> Version: G7H9 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <ATAPI DVD DD 2X16X4X16>Version: G7H9 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    === Scsi-Device-Map ===
    CdRomPeripheral : ATAPI DVD DD 2X16X4X16 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD2000JD-00HBB0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
    CdRomPeripheral : RX3193B LRD294H 1.0 dtscsi Port 5 ID 0 DMA: Off
    === CDRom-Device-Map ===
    ATAPI DVD DD 2X16X4X16 D: CDRom0
    NERO IMAGEDRIVE2 E: CDRom1
    RX3193B LRD294H G: CDRom2
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047272kB)
    Free physical memory: 552MB (566232kB)
    Memory in use : 45
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    22.11.2006
    Burn DVD Image
    03:44:59 p.m. #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    03:44:59 p.m. #2 Text 0 File Reader.cpp, Line 124
    Reader running

    03:44:59 p.m. #3 Text 0 File Writer.cpp, Line 122
    Writer ATAPI DVD DD 2X16X4X16 running

    03:44:59 p.m. #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x00
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4294705152
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=466:00.24 ( 2097024) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Documents and Settings\Familia Basilico\Escritorio\DVD\reauthor\framed1.nrg>

    03:44:59 p.m. #5 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    03:44:59 p.m. #6 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2297887 (510:38.37, 4488MB)
    Last address to be written: 2097023 (466:00.23, 4095MB)

    03:44:59 p.m. #7 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    03:44:59 p.m. #8 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: ATAPI DVD DD 2X16X4X16, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    03:44:59 p.m. #9 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    03:44:59 p.m. #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2097024 (2097024) = #2097024/466:0.24
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2097024 blocks [ATAPI DVD DD 2X16X4X16]
    --------------------------------------------------------------

    03:44:59 p.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [ATAPI DVD DD 2X16X4X16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4294705152, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2097024 | lead-out | 1 | 0x41 | 0x00

    03:44:59 p.m. #12 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    03:44:59 p.m. #13 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    03:45:00 p.m. #14 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 4x (5.540 KB/s)

    03:45:00 p.m. #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    03:45:00 p.m. #16 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    03:45:00 p.m. #17 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    03:45:00 p.m. #18 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    03:59:29 p.m. #19 Text 0 File WriterStatus.cpp, Line 116
    <ATAPI DVD DD 2X16X4X16> start writing Lead-Out at LBA 2097024 (1FFF80h), lenght 0 blocks

    03:59:29 p.m. #20 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    03:59:29 p.m. #21 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was 2097023

    04:00:15 p.m. #22 Phase 37 File dlgbrnst.cpp, Line 1685
    Burn process completed successfully at 4x (5.540 KB/s)

    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 06:16:24 p.m.
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25/08/2006 12:47:00 a.m. (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 a.m. (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 a.m. (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 a.m. (InCD4 driver for win NT/2K/XP)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  10. #10
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    Here's the Nero CD-DVD Speed report:

    Nero CD-DVD Speed: Disc Info
    Información básica
    Tipo de disco: : DVD-R
    Tipo de norma : DVD-R
    Fabricante: : Verbatim
    MID : MCC 03RG20
    Velocidades de grabación: : 2.4 X - 4 X - 8 X - 12 X - 16 X
    Capacidad en blanco : 4.38 GB
    : 4489 MB
    : 4707321856 bytes
    Información extendida
    Capas : 1
    Uso : General
    Información del grabador
    Estado de disco : Vacío
    Datos de bajo nivel
    Pre-recorded Information in Lead-in (0Eh)
    0000 - 01 40 C1 FD 9E D8 52 00 02 85 0D 0E 88 9A 80 00 - .@....R.........
    0010 - 03 4D 43 43 20 30 33 00 04 52 47 32 30 20 20 00 - .MCC.03..RG20...
    0020 - 05 88 80 00 00 00 02 00 E0 D4 06 00 18 EE 91 7C - ...............|
    0030 - 78 FB 91 7C FF FF FF FF 71 FB 91 7C 18 6A DA 77 - x..|....q..|.j.w
    0040 - 51 6A DA 77 00 00 16 00 02 00 00 80 30 00 00 00 - Qj.w........0...
    0050 - 18 00 00 00 30 00 00 00 18 D5 06 00 40 00 01 00 - ....0.......@...
    0060 - 0B 00 00 00 20 D4 06 00 4E 00 4E 00 98 D5 06 00 - ........N.N.....

    Oh, I'm sorry it's in Spanish, just ask if there's something you don't understand.

  11. #11
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    You are fine, I would test those burns in another standalone, if you can't find verbatim dvd+r's to use I would buy another dvd player

    I would also reccomend uninstalling INCD and using the clean tool just to be safe, it was never intended for windows xp

  12. #12
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    OK, I'll see what I can do.

    Thank you very much for your help.

  13. #13
    Just Trying To Help soup's Avatar
    Join Date
    Nov 2005
    Location
    Canada Region 1
    Posts
    7,524

    Default

    Nero Clean Tool for InCD.

    Edit: that link no longer works, I just tried it sorry.

    Edit: try this one: http://ww2.nero.com/nero6/eng/Clean_Tools.html
    Last edited by soup; 23 Nov 2006 at 11:12 AM


  14. #14
    Junior Member
    Junior Member

    Join Date
    Nov 2006
    Posts
    10

    Default

    It works!!!! Thank you so much, I can barely explain the peace of mind that you have awarded me...

    Just done a final trial after having done everything you recommended, and it worked perfectly this time. I had totally lost my hope... Thanks again, I wish I could return you the favour somehow. Just let me know.

    Cheers.

    Leo.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help Me I Am Going Nuts!!!!!!!!!!!
    By Grail in forum AVI, DivX/Xvid
    Replies: 3
    Last Post: 11 Feb 2002, 10:09 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •