Lite-On iHAS324 F, Firmware CL19 does not find suitable drive

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • smallfreak
    New Member
    New Member
    • Mar 2017
    • 1

    Lite-On iHAS324 F, Firmware CL19 does not find suitable drive

    Hi folks,

    I was directed here from ImgBurn, which thought I could update my firmware for this drive.

    My drive is "manufactured September 2016" and seems to contain firmware CL8F

    The program points me to the firmware File CL19 which does not like my drive:
    Code:
    No matched drive detected !
    This utility is only for [B][COLOR=Red]ATAPI iHAS324   F[/COLOR][/B] drive.
    
    Detected drives :
     0-0-0-0 E:TOSHIBA DVD-ROM SD-M1212 1R14
     2-0-0-0 F:DiscSoftVirtual          1.0 
     2-2-0-0 R:[B][COLOR=Red]ATAPI   iHAS324   F[/COLOR][/B]      CL8F
    Note the two additional spaces in the name? This might be because of output formatting or it may be part of the name.

    Is this a problem with the firmware, with the drive, with the software, the user, the operating System (Windows 10) and should I even care about this and leave it with the CL8F firmware?

    I could not find any hint what difference it would make whether I upgrade or not. Normally I try to keep up with patches and updates, but maybe I should better stay with the wisdom:
    If it's not broken, DON'T FIX IT!
Working...